YOKOGAWA DO70G User Manual page 10

1.4 Model and Suffix Codes
DO70G Optical Dissolved Oxygen Sensor
l
Model
DO70G
Insert length
Type
Cable length
−
Option
*1: When using DO70G with DOX8HS/PB350G/PB360G, a dedicated adaptor is required.
When ordering DO70G with the holder, refer to the combination table below and select an adaptor according to the Holder Option
Code.
If you order only DO70G, please make a separate order for the adaptor by Part No. in the table below. However, if you are
already using DOX8HS/PB350G/PB360G and DO70G, you can use the existing adaptor.
In this case, you do not need to make an additional order for the adaptor.
Holder-Adaptor Combination
Holder Model
Submersion Type Holder
DOX8HS
Slant Type Float Holder
PB350G
Vertical Type Float Holder
PB360G
*2: The power cable is +1.5 m (Refer to 1.5 External View and Dimensions).
For connection to DO402G
*3: For connection to FLXA402
Maintenance Parts
l
Please refer to 4.3 Maintenance Parts.
Suffix Code Option Code
···························· ··················· Optical dissolved oxygen sensor (*1)
-120 ··················· 120 mm
-E ··················· Always -E
-00N ···················
-03E ···················
-05E ···················
-10E ···················
-05D ···················
-10D ···················
-15D ···················
-20D ···················
-N
··················· Always -N
/SCT
/D72S (Stainless Steel, Holder material: -S3)
/D72P (Polypropylene, Holder material: -PP)
/D72 (Polypropylene)
/D72 (Polypropylene)
Description
No cable
3 m (*2)
5 m (*2)
10 m (*2)
Digital 5 m (*3)
Digital 10 m (*3)
Digital 15 m (*3)
Digital 20 m (*3)
Stainless steel tag plate
Holder Option Code
<1. General>
Part No.
K9148NA
K9148NB
K9679CA
K9679CA
IM 12J05D04-01E 8th Edition : July 11, 2023
1-3