Rimage DL5200 Replacement Procedure page 7

0BReplace a Recorder on a Rimage DiscLab System
c. Remove the Torx T10 screws (Qty. DL5200/DLN5200 = 8, DiscLab = 4) from the right side cover.
d. Remove the right side cover and set it aside.
DL5200
5. Tighten the Allen screws (Qty. 2 per side, 4 total)
to secure the recorder in the aligned position.
6. Install the side covers.
a. Position the left side cover on the DiscLab.
b. Insert and tighten the Torx T10 screws (Qty. DL5200/DLN5200 = 8, DL = 4) to secure the left side cover.
DL5200/DLN5200
2000122_D
DiscLab™, DL5200™ and DLN5200™
Right Side Cover
DLN5200
Left Side Cover
© 2008, Rimage Corporation
DiscLab
DiscLab
7