Download Print this page

Beurer LW 220 Instructions For Use Manual page 18

Air washer

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 11
8. What if there are problems?
Problem
No display.
The upper cover cannot be
fitted precisely.
The water level gauge
always shows the same fill
level despite differing water
levels.
9. Replacement parts
Only use original parts and from the manufacturer.
10. Replacement parts and additional items
Replacement parts and additional items are available from the corresponding service address (according to
the service address list). Please state the corresponding item number.
Replacement parts and additional items are also available from retailers.
Item
Beurer by Taoasis "Vitality" aroma oil (10 ml)
Beurer by Taoasis "Harmony" aroma oil (10 ml)
Beurer by Taoasis "Relax" aroma oil (10 ml)
Beurer by Taoasis "Sleep Well" aroma oil (10 ml)
Aqua-Fresh
AntiCal
11. LW 220 technical data
Dimensions (L x W x H)
Cable length
Weight when empty
Power supply unit
Output
Suitable for rooms
Maximum capacity
Cause
The device is not connected to
mains power supply.
The device has switched itself off
due to safety reasons.
The guide rails do not fit and the
upper cover is jammed.
The fill level sensor is dirty.
30 x 30 x 34 cm
approx. 2 m
approx. 5,5 kg
100 – 240 Volt; 50/60 Hz
2-4-7 Watt
up to approx. 40 m²
approx. 7.25 litres
Solution
Connect the mains plug and switch on
the device.
Clean and refill the device before next
use. Then switch it on again.
Turn the upper cover around by 180°
and reposition it on the tub.
Remove the upper cover from the tub,
unlock the water level sensor, remove
it and clean carefully.
Item number
681.30
681.31
681.32
681.33
162.955
162.956
18

Advertisement

loading