Advertisement
Figure 7:
Installing Batteries into Battery Shelves (588820200)
Connect Link Furnished
with Battery to these
Two Terminals
Connect NEG (-)
Battery Cable
to this Terminal
(string 1)
If trays are equipped with
circuit breakers, TURN OFF ALL
circuit breakers before installing
and connecting any batteries!
Note:
1. One tray shown as example.
2. Cabling detail omitted.
1/4" Ground
Washer
(1 Place)
Vertiv
| NetSure Battery Rack System (-48 VDC) Installation Manual (Section 6045) | Rev. E
Connect Link Furnished
with Battery to these
Two Terminals
1/4-20 X 2/8" Bolt
1/4" Ground Washer
(1 place)
Battery Retention Bracket.
See Detail A for alternate orientation.
DETAIL A
Alternate Orientation
of Retention Bracket
Connect Link Furnished
with Battery to these
Two Terminals
Connect POS (+)
1/4-20 X 5/8" Bolt
1/4" Lock Washer
1/4" Flat Washer
(3 places)
10-32 x 1/2" Pan Head Screw (3 Places)
No. 10 Flat Washer (3 Places)
No. 10 Lock Washer (3 Places)
Spacer (3 Places)
1/4-20 x 5/8" Hex
Head Screw
(4 Places)
1/4-20 Lock Washer
(3 Places)
1/4-20 Flat Washer
(3 Places)
Battery Cable
to this Terminal
(string 1)
Spacers
Separate
Batteries
(3 places per tray,
front and back)
18
Advertisement
