Cisco 8800 Series Manual page 34

Non-Lockable Wall Mount Components
• Cisco IP Phone 8800 Series Wall Mount Kit with Single KEM: The kit is installed on the Cisco IP Phone
Non-Lockable Wall Mount Components
This section describes how to install the Cisco IP Phone 8800 Series Wall Mount Kit.
The following figure shows the components of the Cisco IP Phone 8800 Series Wall Mount Kit.
Figure 6: Components
The package contains the following items:
• One phone bracket
• One wall bracket
• Four #8-18 x 1.25-inch Phillips-head screws with four anchors
• Two K30x8mm self-tapping screws
• One 6-inch Ethernet cable
The following figure shows the wall mount kit installed on the phone.
Cisco IP Phone Accessories
34
8851, and 8861 with one attached Cisco IP Phone 8800 Key Expansion Module. The PID is
CP-8800-BEKEM-WMK=
Cisco IP Phone Accessories