Husqvarna AUTOMOWER 430X Operator's Manual page 23

3.8.2 To do the basic settings
Before you start the product for the first time, you
must do the basic settings and calibrate the
product.
1. Push the STOP button.
2. Set the Main switch to 1.
3. Push the arrow buttons and the OK button.
language, country, date, time and set
Select
a PIN code.
Note: It is not possible to use 0000 as PIN
code.
4. Put the product in the charging station.
5. Push the START button and close the hatch.
Note: Some models require a factory PIN code
before the selection of personal PIN code.
Note: Use the MEMO page at the beginning of
the manual to make a note of the PIN code.
Introduction on page 3 .
The product then moves away from the charging
station and stops, while it calibrates some of the
product settings.
®
3.9 Automower Connect app
The app gives 2 modes of connectivity: Long-
range cellular connectivity and Short-range
®
Bluetooth connectivity.
The product can connect to mobile devices that
®
have the Automower Connect app installed.
®
Automower Connect is a free app for your
mobile device. The Automower
gives extended functions to your Husqvarna
product. You can:
• See the status of your product.
• Change settings to your product.
• Get extended product information.
• Get an alarm if the product moves out of the
work area.
To pair the product with the app, refer to
®
Automower Connect and the product on page
33 and To pair Automower
and the product on page 32 .
1201 - 001 - 05.06.2019
®
Connect app
To pair
®
Connect@Home
Note: If the cellular connectivity does not work or
if you have not created a Husqvarna account,
®
Automower Direct can be used to access the
product with Short-range Bluetooth
To start to use Automower
Refer to
page 33 .
Note: All countries do not support Automower
Connect because of regional specified cellular
systems. The included Automower
time service only applies if there is a third part
sub-supplier of 2G/3G available in the operational
area.
3.9.1 To install Automower
1. Download the Automower
your mobile device.
2. Sign up for a Husqvarna account in the
®
Automower Connect app.
3. Log in to your Husqvarna account in the
®
Automower Connect app.
®
3.9.2 Automower Connect menu
The main menu in Automower
options:
Dashboard
•
Map
•
Settings
•
Messages (only available for Bluetooth
•
short-range connectivity)
3.9.2.1 Dashboard
The dashboard shows the current status of the
product both visually and in text. It is very easy to
control the product by tapping the controls, for
Park .
example
In the lower part of the dashboard there are
Timer settings and the Map . The
shortcuts to the
dashboard also shows symbols according to
below:
1. The battery status shows the remaining
battery charge. A flash is shown over the
battery symbol when the product charges its
battery. A plug is shown over the battery
symbol when the product is standing in the
charging station without charging.
2. Cutting height.
®
connectivity.
® Direct on
®
®
Connect life-
®
Connect
®
Connect app on
®
Connect offers 4
Installation - 23