Ricoh Aficio MP161 Troubleshooting Manual page 79

Problem
Images are print- The feed orien-
ed in the wrong tation you se-
orientation. lected and the
feed orientation
selected in the
printer driver's
option setup
might not be the
same.
Page layout is Print areas differ
not as expected. depending on
the machine
used. Informa-
tion that fits on a
single page on
one machine
may not fit on a
single page of an-
other machine.
Photo images Some applica-
are coarse. tions reduce
print resolution.
When using -
Windows
98SE/Me or
Windows
2000/XP, Auto
Reduce/En-
large print does
not come out as
expected.
The print job is -
not canceled
even when the
machine is
switched to of-
fline status.
Images are in- You may be us-
complete, or ex- ing paper small-
cess pages are er than the size
printed. selected in the
application.
Duplex printing is Duplex printing
malfunctioning. cannot be done
with paper set
in the bypass
tray.
Cause
Set the machine's feed orientation and the printer driver's
feed orientation accordingly. See the printer driver Help.
See the printer driver Help.
Check your application.
Make sure the application's paper size and orientation set-
tings match those of the printer driver. If a different paper size
and orientation are set, select the same size and orientation.
Select [Printer Priority] for [Signal Control].
See "Interface Settings", General Settings Guide.
Use the same size paper as that selected in the application.
If you cannot load paper of the correct size, use the reduc-
tion function to reduce the image, and then print.
See the printer driver Help.
When using duplex printing, make settings to use paper
from a tray other than the bypass tray.
The Printer Function
Solution
6
71