Advertisement
Description of the Upgrade
Installation Procedure for the Upgrade
Figure 20 Location of Cable Tie to Secure W21 (N5245-20008)
— W43 (reuse) (N5245-20009)A37 reference mixer switch to A27 mixer brick
— W41 (reuse) (N5245-20006)A37 reference mixer switch to front-panel REF 1
— W102 (N5245-20075) A48 port 4 receiver attenuator to A28 mixer brick (D)
— W100 (N5245-20066) A47 port 3 receiver attenuator to A28 mixer brick (C)
— W104 (reuse) (N5245-20057) A49 port 2 receiver attenuator to A27 mixer
— W98 (reuse) (N5245-20056) A46 port 1 receiver attenuator to A27 mixer
Installation Note N5245-90133
(R1)
* Connect W43 to bottom R1 connector on the mixer bricks.
SOURCE OUT
* Connect W102 to top D connector on the mixer bricks.
* Connect W100 to bottom C connector on the mixer bricks.
brick (B)
* Connect W104 to bottom B connector on the mixer bricks
brick (A)
43
Advertisement
