Advertisement
EVGA Z370 Classified K (134-KS-E379)
3. Once you have verified there are no detection/driver
installation issues with the cards you can enable SLI
.
®
Right-click on the desktop and select "NVIDIA
Control
®
Panel" ("NCP").
Next, select "Configure SLI
, Surround, PhysX" under the
®
"3D Settings" menu. The default is "Disable SLI."
To enable SLI
, click "Maximize 3D Performance," circled in
®
red below, and click "Apply" at the bottom.
Before you can enable SLI
, the NCP may ask you to close certain programs and
®
processes; you cannot continue further until this is completed.
At this point the display may go black a few times, or appear to change resolution and
back again quickly; this is normal. Also, if you are running a G-Sync monitor, it will turn
off and on during this process, which may take approximately 5 and 20 seconds.
- 96 -
Advertisement
