Advertisement
EVGA Z370 Classified K (134-KS-E379)
2. After the cards are installed, have power connected, and the SLI
bridge attached,
®
boot into Windows. The graphics driver will normally identify the cards and
automatically configure the driver. If not, then you may need to reinstall the driver.
Once finished, you will receive a popup in the lower right corner stating that you have a
SLI
capable setup and it needs to be configured. If you
®
did not see the message, then first verify that both cards
are detected and functioning without system errors from
Windows Device manager.
Right-click on the Start menu and select Device Manager.
Under "Display Adapters" you should see the type and
number of video cards you have installed.
- 95 -
Advertisement
