Advertisement
EVGA Z370 Classified K (134-KS-E379)
Installing the I/O Shield
The motherboard kit comes with an I/O shield that is used to block internal
components from dust and foreign objects, while also promoting correct
airflow within the chassis.
Before installing the motherboard, install the I/O shield from the inside of the
chassis. Press the I/O shield into place and make sure it fits securely.
Installing the Motherboard
Proper motherboard installation depends on several factors: whether the Z370
Classified K will replace an older motherboard or the beginning of a new PC,
the type of chassis that will house your PC components, and the amount of
space you will have to build your system once the motherboard is installed. You
must first determine if it would be easier to secure the motherboard to the
chassis or if it would be easier to install other components prior to this step. It
is normally easier to secure the motherboard first.
Note:
Be sure that the CPU fan assembly has enough clearance for the system
case covers to lock into place and for expansion cards. Also, make sure the
CPU Fan assembly is aligned with the vents on the covers; this is to allow the
airflow to properly exhaust from the chassis. The CPU Fan assembly
orientation will depend on the system case being used.
- 28 -
Advertisement
