Bosch HDS8655U Use And Care Manual page 36

en-us Cleaning and maintenance
Place the door in a convenient and stable location for
5.
cleaning.
Refit the door in the reverse order in which it was
6.
removed.
Note: Do not throw away the locking pins. Keep them in a
safe place. They will be needed anytime the door is
removed from the appliance.
Replacing an oven light
WARNING
WHEN REPLACING AN OVEN LIGHT:
Make sure the appliance and lights are cool and that the
▶
power to the appliance has been turned off before
replacing the light bulb(s). Failure to do so may result in
electrical shock or burns.
Wear gloves.
▶
The lenses must be in place when using the appliance.
▶
The lenses serve to protect the light bulb from breaking.
▶
The lenses are made of glass. Handle carefully to avoid
▶
breaking. Broken glass may cause an injury.
The light socket is live when the door is open.
▶
Bulb specifications:
¡ Voltage: 120 V
¡ Power: 40 W
¡ Fitting: G9
¡ Temperature resistance: 575 °F (300 °C)
To change the bulb
Allow the cooking compartment to cool down.
1.
Open the appliance door.
2.
Place a cloth in the oven cavity to prevent damage.
3.
Remove the racks and rack guides.
4.
Remove the glass cover.
5.
To do this, open the glass cover at the front with your
hand. Should you experience difficulties removing the
glass cover, use a spoon to help.
Remove the oven light bulb.
6.
Replace the oven light bulb with a bulb of the same
7.
type.
Replace the glass cover for the oven light bulb.
8.
36
Replace rack guides and racks.
9.
Remove the cloth.
10.
Switch the circuit breaker back on.
11.
Check that the oven lighting is working again.
12.