Test Control Bar - R&S EMC32 Application Note

Running an EMI Band Evaluation Test
Figure 38: The frequency control and the Test Process EMI Automotive are
visible on the right side of the screen

4.2 Test Control Bar

The test control toolbar is located at the bottom of the main window. It contains buttons
which look like the ones of a video player. Different functions can be performed with
the help of these buttons e.g. test can be started or stopped etc. Functions of these
buttons are mentioned below.
Figure 39: Test Control Toolbar before start
Figure 40: Test Control Toolbar during test run
Alternatively to clicking on one of the symbols in the toolbar the following functions can
be controlled via the keyboard during a single measurement:
Rohde & Schwarz EMI Automotive Band Evaluation with R&S©EMC32-K51 – 1SP07- 30
01.00