Start A Test - R&S EMC32 Application Note

Running an EMI Band Evaluation Test
Figure 32: Starting a New Test
Before we run the test only one empty graphics is shown. In measurement mode, the
file explorer and Test component explorer, which are visible in analysis mode, will be
hidden. Both explorers can be faded in when placing the mouse cursor on one of the
explorers tear off buttons. When the cursor is removed the explorer will be faded out
once again.
Figure 33: As long as the Explorer is unpinned the EMC32 Explorer OR the Test
Components is visible during mouse pointer is resting on the dedicated tear-off
button

4.1.1 Start a Test

The start of a test is a simple mouse click with the left mouse button on the start icon,
Figure 34.
Rohde & Schwarz EMI Automotive Band Evaluation with R&S©EMC32-K51 – 1SP07- 27
01.00