The Middle Part Of The Template Editor; The Lower Part Of The Template Editor - R&S EMC32 Application Note

2.2.2.2

The middle part of the template editor

The middle part contains a table, which gives an overview over all defined sub-ranges
for the EMI Automotive measurement. It is used for displaying a list of sub-ranges. The
settings of the currently selected (active) sub-range in the sub-range list can be
changed in the lower part of the editor.
Figure 15: The pop-up menu and the two buttons allow basic changes
2.2.2.3

The lower part of the template editor

The lower part is the most important one and consists of five tabs: Test Setup, Sub-
ranges, Graphics, Data Reduction and Actions. The parameters for each band related
test (here: sub-range) need to be configured with appropriate setting in all five tabs as
required by the test case.
How to configure the test cases in the lower part of the template editor is topic of
chapter 3.
01.00
Rohde & Schwarz EMI Automotive Band Evaluation with R&S©EMC32-K51 – 1SP07- 14
Configuration of EMI Automotive Band Evaluation Test