Settings In Data Reduction Tab - R&S EMC32 Application Note

Additional
Limit
Lines for
Graphic
Display
titles of
limit lines
in graphic

3.5 Settings in Data Reduction tab

Figure 24: Do Data Reduction unchecked grays out all settings
01.00
Min / Max Level: Here the maximum and minimum value
for the Y-Axis of the graphic will be defined.
Defines two additional limit lines which shall be displayed
only for each of the two detectors.
For each limit line optionally an offset may be applied
(thus the copy of the limit line added to the appropriate
EMI test will be corrected by the defined offset value).
Displays the titles of the limit lines extended with the
offset if different from 0.
Rohde & Schwarz EMI Automotive Band Evaluation with R&S©EMC32-K51 – 1SP07- 22
Configuration of Test Cases in the Editor