Table of Contents
Advertisement
5. Experiment with the F52's placement
to achieve the best overall tonal
balance, image precision, and sense of
spaciousness in the listening room.
Refer to the "Loudspeaker Placement"
section for additional information
about loudspeaker placement.
6. Adjust the Tweeter Level switch on
each F52 to change high-frequency
balance and timbre.
7. Repeat these steps to optimize
performance of the second F52.
Note
For best results, set the Tweeter Level
switch on both F52s to the same position.
LOUDSPEAKER VOLUME LEVELS
High-order filters include steep cut-offs to
reduce potential damage from "out-of-
band" frequencies. Combined with carefully
selected transducers and filter network
components, this approach helps the F52
to maintain its performance under
extreme operating conditions.
However, all loudspeakers have limits
when it comes to continuous playback. To
extend these limits, avoid playback at
volume levels that distort or strain sound.
CAUTION
To avoid damage, reduce volume level
immediately if loudspeaker sound is not
clean and clear.
SPECIFICATIONS
DIMENSIONS & WEIGHT
Width:
9.5 inches (24.13cm)
Height:
43.94 inches (111.61cm)
Depth:
17.5 inches (44.45 cm) with
grille
17 inches (43.18cm) without
grille
Weight:
87.70 pounds (39.78kg) with
grille
86.20 pounds (39.10kg) without
grille
Specifications are subject to
change without notice.
Note
Other specifications are listed on the next
page.
OBTAINING SERVICE
To obtain warranty or non-warranty service,
contact an authorized Revel dealer. Refer to
the included Revel warranty card for
warranty information.
REVEL Performa F52
OWNER'S MANUAL
21
Hide quick links:
Advertisement
Table of Contents
