Gas Leak Testing - Fieldmann FZG 3011 User Manual

2. Connect the gas hose to the BBQ and tighten the
hose clamp.
The picture shows the connection of a gas hose
in accordance with Swedish standards. In some
countries the gas hose is of a larger diameter and is
pushed all the way onto the connector.
3. Open the lid and make sure that the gas control
knobs are set to OFF.
4. Open the gas cylinder by turning the handwheel
anticlockwise.

Gas leak testing

Always test for gas leaks before using the BBQ after the gas cylinder has been connected.
Do not smoke while checking for gas leaks.
Do the gas leak test outdoors.
Never use a lit match, cigarette lighter or other naked flame to localise a gas leak.
How to perform a gas leak test:
1. Mix up a solution of water and some washing-up
liquid.
2. Spray or brush some of the soapy water solution
onto the points shown in the picture.
If you detect any leaks (if you find bubbles appearing),
make sure that they are sealed before starting to use the
product. If you are unsure about using the bbq,
contact a qualified service technician before using the
product.
GAS GRILL
9 EN
User's manual
USER'S MANUAL