Daikin BRC1H63K Operation Manual page 19

About icon list of Operation Modes
The indoor unit can operate in various operation modes.
Icon
Auto
Icons vary depending on the
system.
Cool
Heat
Dry
INFORMATION
Available operation mode are depend on indoor unit.
Characteristics of Heat Mode
The system automatically controls the following operating modes to prevent the
reduction of heating capacity and space comfort.
Defrost operation
Hot start
18
Operation mode
• The system will automatically go into defrost operation to prevent frost
accumulation at the outdoor unit and subsequent loss of heating
capacity.
• The indoor unit fan will stop, and "
remote controller.
• The system will finish the Defrost operation and return to normal
usually within six to eight minutes. It won't last for more than ten
minutes.
• When the system starts heating operation, the indoor unit fan will
operate with a delay in order to prevent a cold draft.
(In that case, "
STANDBY
Icon Operation mode
Fan only
Ventilation + Air Clean
Ventilation
Air Clean
" will be displayed on the
STANDBY
" will be displayed on the remote controller.)