Daikin BRC1H63K Operation Manual page 14

Icon
24-hour ventilation
Night purge
Ventilating standby
Ventilating
operation
Pre Vent (Fresh-up)
Outdoor
temperature
Room temperature
Room humidity
Outdoor humidity
CO
2
Zigbee*
Timer setting
(A) (B)
Warning
* The Bluetooth® and Zigbee™ word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc and Zigbee Alliance, respectively, and the use of such marks by Daikin
Industries LTD. is under license. Other trademarks and trade names are those of their respective
owners.
Name
Indicates that 24-hour ventilation is set.
* May not be displayed even if connected to a unit with
this function.
Indicates that night purge is set.
Indicates that ventilating operation has been stopped
temporarily. (In order to reduce energy loss, ventilating
operation is stopped immediately after cooling or heating
operation starts).
Indicates that ventilating operation is being carried out
even when operation is stopped, if 24-hour ventilation and
night purge are set.
Indicates that ventilating is being carried out powerfully
due to a large difference in the incoming airflow rate and
exhaust airflow rate.
Indicates the type of sensor value.
concentration
Displayed:
Zigbee sensor linked control is available.
Blinking:
Displays there is error with Zigbee sensor connection.
(A): Dis plays that Off timer or Schedule is available.
(B): If clock setting becomes unset, this mark is
Indicates that an error occurred, or that an indoor unit
component needs to be maintained.
Description
displayed.
13