Daikin BRC1H63K Operation Manual page 13

About icons on the information screen
The items displayed vary depending on the indoor unit you are using.
Icon
Information
MAIN/SUB remote
controller
Bluetooth*
Setback
Centralized Control
Changeover Under
Control (VRV only)
Backup
Energy savings
Test operation
Defrost/Hot start
Self-cleaning filter
operation
12
Name
Indicates an information screen.
Displayed when used as the MAIN/SUB remote controller.
1=main, 2=sub
Indicates that the controller is communicating with a
mobile device, for use with the app.
Indicates that the indoor unit is operating under setback
conditions.
A function to keep the room comfortable when the a/c is
off by automatically turning on the unit when the
temperature exceeds setback setpoint.
Indicates that the system is controlled by central control
equipment (optional accessory) and that control of the
system by the controller is limited.
Displayed:
The remote controller does not have master control.
Unable to select heating/cooling operation.
* Immediately after the start of operation, this icon may not
be displayed on the information screen even if the
remote controller does not have master control. If you
want to check if the remote controller has master control,
confirm on the home screen.
Blinking:
None of the remote controllers in the system have master
control.
Can be set as the master controller during this time.
Not Displayed:
The remote controller has master control.
Able to select heating/cooling operation.
Indicates that backup operation is being carried out.
Indicates that the system's energy consumption is being
limited, and that it is running with restricted capacity.
Indicates that Test Operation mode is active.
Indicates that the defrost/hot start mode is active.
Indicates that selfcleaning filter operation is active.
Description