Table of Contents
Advertisement
Indoor Unit Installation Instructions
Indoor Unit Installation Location Selection
Follow the below best practices for selecting an optimal space for installation the indoor unit:
• DO NOT install the unit on a wall that is subject to vibrations.
• DO NOT install the system near sources of heat, steam, or flammable gases.
• DO NOT install the indoor unit in a location that is exposed to direct sunlight.
• DO ensure that the inlet and outlet vents are not obstructed. The system should be able to
output air all across the room.
• DO minimize the distance between the indoor and outdoor unit and install the unit in a
place where connecting the indoor and outdoor unit will be as simple as possible.
• DO install the unit on a strong wall and where it is easy to drain the condensate water.
• DO install the unit in a location where it will be easy to service the machine and perform
any necessary maintenance.
• DO obey the following tolerances depicted in the illustration below:
10-15 cm (4-6 in)
or more
Page 22
10-15 cm (4-6 in) or more
2.0 m (80 in) or more
6
10-15 cm (4-6in)
or more
Advertisement
Table of Contents
