Table of Contents
Advertisement
INSTALLATION
Check the appliance is electrically safe when you have finished.
Final Checks
Fig. 8.13
Hob Check
Check each cooking zone in turn. Be sure to use pans of the
ArtNo.350-0010 - Fitting the plinth 1 (Kitchener)
correct size and material.
Grill Check
Turn on the grill control and check that the grill heats up.
Oven Check
Fig. 8.14
Set the clock as described earlier, and then turn on the ovens.
Check the oven fans start to turn and that the ovens heat up.
Final Fitting
ArtNo.350-0011 - Fitting the plinth 2 (Kitchener)
Fitting the Plinth
Fit the inner plinth to the bottom front of the cooker using
Outer plinth
the 4 screws provided (Fig. 8.13).
Outer plinth xing screw
Inner plinth
Fit the outer plinth (2 screws, 1 each end) to the inner plinth.
The height of the outer plinth can be adjusted by sliding it up
or down via the slotted hole (Fig. 8.14).
Customer Care
Installer: Please complete your details in this guide, inform
the user how to operate the cooker and hand over the
instructions.
Thank you.
30
Advertisement
Table of Contents
