18
4. Secure the cable clamp using the self-tapping screws supplied
(No 8 x
• the tie-wrap securing loops are on the right (below the POWER and
• the clamp securely holds all cables
• the legs on cable clamp do not pinch any of the cables
1
If the power and/or motor cables are larger than 5 mm (
Note:
on top of the cable clamp with the tie-wrap supplied. Make sure the tie-wrap sits above the
cables (as shown below), so it pulls the cables against the clamp when tightened.
3
/
in, pan-head), making sure:
4
terminals on the computer)
MOTOR
SmartPilot Series Commissioning Guide
2
1
/
in) diameter, secure them
4
D6380-1
D6381-1