How To Connect Nmea Equipment; Warning: Connections To Other Equipment - Raymarine SmartPilot ST6001 Commissioning Manual

12

1.8 How to connect NMEA equipment

If you have equipment on your boat that transmits or receives NMEA 0183 data
(e.g. GPS), you can connect this equipment to the SmartPilot. NMEA equipment
can be connected in any combination of these ways:
• using the SmartPilot computer NMEA input/output
• using the NMEA input on the back of the SmartPilot controller. (Refer to the
Controller handbook for NMEA data details)
• using the SeaTalk/NMEA interface (part number: E85001) to convert the
NMEA data to SeaTalk data

WARNING: Connections to other equipment

If you are connecting Raymarine equipment to other equipment
using a non-Raymarine cable, you MUST attach an appropriate
suppression ferrite to the cable near to the Raymarine unit.
GPS
Other
Instrument
SmartPilot computer terminals
Red
Screen Yellow
SeaTalk
NMEA NMEA
NMEA
radar
SmartPilot Series Commissioning Guide
Controller (rear)
NMEA
instrument
SeaTalk
NMEA
D6303-1