Advertisement

Quick Links

933.TL7
DS3+ / DS4+
v2.39.198.9
2016 Toyota 4Runner (G Key)
THTON10, THTON5 Compatible
(Sold Separately)

Advertisement

Table of Contents
loading

Summary of Contents for Directed 933.TL7

  • Page 1 933.TL7 DS3+ / DS4+ v2.39.198.9 2016 Toyota 4Runner (G Key) THTON10, THTON5 Compatible (Sold Separately)
  • Page 2: Table Of Contents

    Contents Introduction Vehicle function compatibilities Pre-installation and application warnings Key type Installation Wiring diagram with T-Harness (THTON5) Wiring diagram with T-Harness (THTON10) Wiring diagram Locating components in the vehicle Vehicle connections Module programming Important! The master key is required to complete the module programming successfully. Module programming for convenience only (skip transponder) Module programming for security-only installations Pairing remotes...
  • Page 3: Introduction

    1. Follow and complete the wiring diagram(s) related to your installation through the app. 2. When installation is complete, select Configure DS4/DS4+. 3. Follow the on-screen instructions. 933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key) ©2023 VOXX•DEI LLC. All rights reserved.
  • Page 4: Vehicle Function Compatibilities

    Brake Status (foot brake) Immobilizer Bypass-Data No Key Req'd Door Locks Status 3x LOCK START (Start control using OEM Remote) E-Brake Status Accessory Activation Ignition Status Ignition Activation 933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key) ©2023 VOXX•DEI LLC. All rights reserved.
  • Page 5: Pre-Installation And Application Warnings

    For vehicles with dot-stamped keys, the TL10 firmware. the TL5 & TL7 firmware. see the TL11 firmware. Note: Some replacement keys may not have any markings on the key. 933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key) ©2023 VOXX•DEI LLC. All rights reserved.
  • Page 6: Wiring Diagram With T-Harness (Thton5)

    Parking Light: Lt. Blue/Black Headlight Switch 10-pin White Connector (-) Parking Lights: Pin 18 Slide to open Legend: Mandatory Connections Security Only Remote Start Only Remote Start + Security 933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key) ©2023 VOXX•DEI LLC. All rights reserved.
  • Page 7: Wiring Diagram With T-Harness (Thton10)

    CAN2. (middle conn. left side of steering column) 10-pin White Connector Slide to open Legend: Mandatory Connections Security Only Remote Start Only Remote Start + Security 933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key) ©2023 VOXX•DEI LLC. All rights reserved.
  • Page 8: Wiring Diagram

    Legend: Connector Mandatory Connections Security Only (+) Starter 1: (+) Ignition 1: Pin 6 Pin 8 Remote Start Only (+) 12V: Pin 7 Remote Start + Security 933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key) ©2023 VOXX•DEI LLC. All rights reserved.
  • Page 9: Locating Components In The Vehicle

    Locating components in the vehicle 933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key) ©2023 VOXX•DEI LLC. All rights reserved.
  • Page 10: Vehicle Connections

    No Connection No Connection H2/19 Blue No Connection No Connection H2/20 Green No Connection No Connection H2/21 Gray (-) Hood Switch Input H2/22 Violet/White No Connection No Connection 933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key) ©2023 VOXX•DEI LLC. All rights reserved.
  • Page 11 Ignition Switch, white 8 pin plug, pin 6 Black Mandatory RF Port harness, 2-pin white connector (H5) Module Conn./Pin Color Description H5/1 RF Loop H5/2 RF Loop 933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key) ©2023 VOXX•DEI LLC. All rights reserved.
  • Page 12 Temperature sensor harness, 2-pin black connector (H7) Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color Connection H7/1 Black Temperature Sensor H7/2 Black Temperature Sensor 933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key) ©2023 VOXX•DEI LLC. All rights reserved.
  • Page 13: Module Programming

    For more information, refer to the Tach Learning procedure section. * Your aftermarket remote may differ from the model shown in the illustrations. You have successfully completed the module programming sequence. 933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key) ©2023 VOXX•DEI LLC. All rights reserved.
  • Page 14: Module Programming For Convenience Only (Skip Transponder)

    You have successfully completed the module programming sequence. 933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key) ©2023 VOXX•DEI LLC. All rights reserved.
  • Page 15: Module Programming For Security-Only Installations

    Your aftermarket remote may differ from the model show in the illustration. You have successfully completed the module programming sequence. 933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key) ©2023 VOXX•DEI LLC. All rights reserved.
  • Page 16: Pairing Remotes

    When used in conjunction with Directed SmartStart ® To enable D2D communication between the DS3+/DS4+ and the Directed SmartStart one of the following actions must be performed ® before providing power to the Directed SmartStart unit: ®...
  • Page 17: When Used In Conjunction With Smartstart

    DO NOT connect the Directed SmartStart 2-pin power harness when using the DS3+/DS4+. Power and ground will be provided by the ® D2D connector on the module. Refer to the Directed SmartStart documentation for further details. ® D2D port configuration Caution! Do not connect the Control Center (antenna) or any digital sensors (8504D) to the white D2D1 port.
  • Page 18: Manual Transmission

    Manual Transmission IMPORTANT! Directed does not approve nor support installations of manual transmission and remote starts on any electronic vehicles (EV), OEM Remote Start Activation firmware, vehicles with convertibles and/or removable tops, including but not limited to Jeep Wrangler, Honda S2000, Mazda Miata, and other such vehicles.
  • Page 19: Led Diagnostics And Troubleshooting

    The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Refer to “Installation MUX not detected. (wiring diagrams & vehicle wiring reference charts)” to check the connections. Flashes red x 7 933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key) ©2023 VOXX•DEI LLC. All rights reserved.
  • Page 20 The smart key was not detected, which prevents the system from shutting down the vehicle. Flashes red x 3 Speed was detected. The vehicle was detected as moving, which prevents the system from shutting it down. Flashes red x 4 933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key) ©2023 VOXX•DEI LLC. All rights reserved.
  • Page 21: Soft Reset

    DS3+: Release the programming button. The LED turns solid red. & Solid Release DS4+: Release the programming button. The LED turns ON blue for 1 second then solid red. & & Solid Solid x1 Sec Release 933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key) ©2023 VOXX•DEI LLC. All rights reserved.
  • Page 22: Tach Learning Procedure (Not Needed With Virtual Tach)

    Therefore, there is no Over-Rev protection. If the vehicle attempts to remote start, but is unsuccessful, the remote start will keep the ignition on for the entire runtime period. 933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key) ©2023 VOXX•DEI LLC. All rights reserved.
  • Page 23: Limited Lifetime Consumer Warranty

    This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. VOXX DEI LLC, 2351 J. Lawson Blvd., Orlando, Florida 32824 933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key) ©2023 VOXX•DEI LLC. All rights reserved.
  • Page 24: Quick Reference Guide (Customer Copy)

    Press & hold for 1 second to remote start. * Press & hold for 5 seconds to activate the trunk release (optional). * Icon and remote appearance may differ depending on the model purchased. 933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key) ©2023 VOXX•DEI LLC. All rights reserved.
  • Page 25 The application enables a “Cloud-Connected Car” like never before, providing 2-way interaction with your vehicle. Connectivity is managed through the Directed Cloud Services (DCS) network linking car, app, end user, and the Internet.

Table of Contents