Related Manuals for Directed 933.SUBARU5
Summary of Contents for Directed 933.SUBARU5
- Page 1 933.SUBARU5 DS3+ / DS4+ v1.06.195.3 2014 Subaru BRZ (Smart Key) THSUN2 Compatible (Sold Separately)
-
Page 2: Table Of Contents
Contents Introduction Vehicle function compatibilities Pre-installation and application warnings Installation Wiring diagram with T-Harness (THSUN2) Wiring diagram Locating components in the vehicle Vehicle connections Module programming For Security-Only and Convenience-Only programming, see next sections. Module programming for convenience only (skip transponder) Module programming for security-only installations Pairing remotes Connecting the module... -
Page 3: Introduction
1. Follow and complete the wiring diagram(s) related to your installation through the app. 2. When installation is complete, select Configure DS4/DS4+. 3. Follow the on-screen instructions. 933.SUBARU5 1.06.195.3 2014 Subaru BRZ (Smart Key) ©2022 VOXX•DEI LLC. All rights reserved. -
Page 4: Vehicle Function Compatibilities
Trunk / Hatch Release Brake Status (foot brake) Key2GO Door Locks Status Immobilizer Bypass-Data No Key Req'd E-Brake Status Accessory Activation Ignition Status Ignition Activation Remote Start Takeover 933.SUBARU5 1.06.195.3 2014 Subaru BRZ (Smart Key) ©2022 VOXX•DEI LLC. All rights reserved. -
Page 5: Pre-Installation And Application Warnings
ONLY required if the radio and autolights do not turn off after 30 seconds. For Security Only installations refer to the "Optional starter disable connection section". Connection only required for manual transmission vehicles. 933.SUBARU5 1.06.195.3 2014 Subaru BRZ (Smart Key) ©2022 VOXX•DEI LLC. All rights reserved. -
Page 6: Installation
18 Immo Data: Yellow, pin 25 Blower Motor Relay (behind glove box) Refer to the Optional starter disable (-) GWA Output: Blue/White connection section for relay details. 933.SUBARU5 1.06.195.3 2014 Subaru BRZ (Smart Key) ©2022 VOXX•DEI LLC. All rights reserved. -
Page 7: Wiring Diagram
(behind glove box) Remote Start + Security Immo Data: 5 4 3 Yellow, pin 25 10 9 8 27 26 35 34 (+) 12V: Red, pin 5 933.SUBARU5 1.06.195.3 2014 Subaru BRZ (Smart Key) ©2022 VOXX•DEI LLC. All rights reserved. -
Page 8: Locating Components In The Vehicle
When flashing your module for Security Only, the Ground When Armed (GWA) function is pre-configured. When flashing your module for Remote Start & Security, you must manually assign the designated output to Anti Grind (AG) Starter Kill. (Applicable to CORE 194+.) 933.SUBARU5 1.06.195.3 2014 Subaru BRZ (Smart Key) ©2022 VOXX•DEI LLC. All rights reserved. -
Page 9: Vehicle Connections
No Connection No Connection H2/13 Violet No Connection No Connection H2/14 Brown No Connection No Connection H2/15 White/Blue No Connection No Connection H2/16 Red/Blue No Connection No Connection 933.SUBARU5 1.06.195.3 2014 Subaru BRZ (Smart Key) ©2022 VOXX•DEI LLC. All rights reserved. - Page 10 No Connection No Connection H4/4 Pink/White No Connection No Connection H4/5 No Connection No Connection H4/6 Green No Connection No Connection H4/7 Violet No Connection No Connection 933.SUBARU5 1.06.195.3 2014 Subaru BRZ (Smart Key) ©2022 VOXX•DEI LLC. All rights reserved.
- Page 11 Temperature sensor harness, 2-pin black connector (H7) Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color Connection H7/1 Black Temperature Sensor H7/2 Black Temperature Sensor 933.SUBARU5 1.06.195.3 2014 Subaru BRZ (Smart Key) ©2022 VOXX•DEI LLC. All rights reserved.
-
Page 12: Module Programming
For more information, refer to the Tach Learning procedure section. * Your aftermarket remote may differ from the model shown in the illustrations. You have successfully completed the module programming sequence. 933.SUBARU5 1.06.195.3 2014 Subaru BRZ (Smart Key) ©2022 VOXX•DEI LLC. All rights reserved. -
Page 13: Module Programming For Convenience Only (Skip Transponder)
Your aftermarket remote may differ from the model shown in the illustrations. You have successfully completed the module programming sequence. 933.SUBARU5 1.06.195.3 2014 Subaru BRZ (Smart Key) ©2022 VOXX•DEI LLC. All rights reserved. -
Page 14: Module Programming For Security-Only Installations
Your aftermarket remote may differ from the model show in the illustration. You have successfully completed the module programming sequence. 933.SUBARU5 1.06.195.3 2014 Subaru BRZ (Smart Key) ©2022 VOXX•DEI LLC. All rights reserved. -
Page 15: Pairing Remotes
When used in conjunction with Directed SmartStart ® To enable D2D communication between the DS3+/DS4+ and the Directed SmartStart one of the following actions must be performed ® before providing power to the Directed SmartStart unit: ®... -
Page 16: When Used In Conjunction With Smartstart
DO NOT connect the Directed SmartStart ® 2-pin power harness when using the DS3+/DS4+. Power and ground will be provided by the D2D connector on the module. Refer to the Directed SmartStart ® documentation for further details. D2D port configuration Caution! Do not connect the Control Center (antenna) or any digital sensors (8504D) to the white D2D1 port. -
Page 17: Manual Transmission
Manual Transmission IMPORTANT! Directed does not approve nor support installations of manual transmission and remote starts on any electronic vehicles (EV), OEM Remote Start Activation firmware, vehicles with convertibles and/or removable tops, including but not limited to Jeep Wrangler, Honda S2000, Mazda Miata, and other such vehicles. -
Page 18: Led Diagnostics And Troubleshooting
The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Refer to “Installation MUX not detected. (wiring diagrams & vehicle wiring reference charts)” to check the connections. Flashes red x 7 933.SUBARU5 1.06.195.3 2014 Subaru BRZ (Smart Key) ©2022 VOXX•DEI LLC. All rights reserved. - Page 19 The smart key was not detected, which prevents the system from shutting down the vehicle. Flashes red x 3 Speed was detected. The vehicle was detected as moving, which prevents the system from shutting it down. Flashes red x 4 933.SUBARU5 1.06.195.3 2014 Subaru BRZ (Smart Key) ©2022 VOXX•DEI LLC. All rights reserved.
-
Page 20: Soft Reset
DS3+: Release the programming button. The LED turns solid red. & Solid Release DS4+: Release the programming button. The LED turns ON blue for 1 second then solid red. & & Solid Solid x1 Sec Release 933.SUBARU5 1.06.195.3 2014 Subaru BRZ (Smart Key) ©2022 VOXX•DEI LLC. All rights reserved. -
Page 21: Tach Learning Procedure (Not Needed With Virtual Tach)
Therefore, there is no Over-Rev protection. If the vehicle attempts to remote start, but is unsuccessful, the remote start will keep the ignition on for the entire runtime period. 933.SUBARU5 1.06.195.3 2014 Subaru BRZ (Smart Key) ©2022 VOXX•DEI LLC. All rights reserved. -
Page 22: Limited Lifetime Consumer Warranty
This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. VOXX DEI LLC, 2351 J. Lawson Blvd., Orlando, Florida 32824 933.SUBARU5 1.06.195.3 2014 Subaru BRZ (Smart Key) ©2022 VOXX•DEI LLC. All rights reserved. -
Page 23: Quick Reference Guide
With Get In and Go, you simply remote start the vehicle, unlock the doors, get in and go... All that's left to do is put the gear in drive and drive off. 933.SUBARU5 1.06.195.3 2014 Subaru BRZ (Smart Key) ©2022 VOXX•DEI LLC. All rights reserved. - Page 24 The application enables a “Cloud-Connected Car” like never before, providing 2-way interaction with your vehicle. Connectivity is managed through the Directed Cloud Services (DCS) network linking car, app, end user, and the Internet.