Directed 933.SUBARU1 Installation Manual
  1. Manuals
  2. Brands
  3. Directed Manuals
  4. Automobile Accessories
  5. 933.SUBARU1
  6. Installation manual
Directed 933.SUBARU1 Installation Manual

Directed 933.SUBARU1 Installation Manual

2010 subaru forester
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
933.SUBARU1
DS3+ / DS4+
v1.38.195.3
2010 Subaru Forester

Advertisement

Table of Contents
loading

Related Manuals for Directed 933.SUBARU1

Summary of Contents for Directed 933.SUBARU1

  • Page 1 933.SUBARU1 DS3+ / DS4+ v1.38.195.3 2010 Subaru Forester...

  • Page 2: Table Of Contents

    Contents Introduction Vehicle function compatibilities Pre-installation and application warnings Wiring diagram Locating components in the vehicle Vehicle connections Module programming For Security-only and Convenience-only (skip transponder) programming, see next sections. Module programming for convenience only (skip transponder) Module programming for security-only installations Pairing remotes Connecting the module 8556T Temperature Sensor...

  • Page 3: Introduction

    To configure via DirectLink DT (mobile app): 1. Follow and complete the wiring diagram(s) related to your installation through the app. 2. When installation is complete, select Configure DS4/DS4+. 3. Follow the on-screen instructions. 933.SUBARU1 1.38.195.3 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 4: Vehicle Function Compatibilities

    Fuel level/EV battery level Entry Monitoring Trunk/Hatch Pin Key2GO Brake Status (foot brake) * Odometer E-Brake Status Immobilizer Bypass-Data No Key Req'd Ignition Status 3x LOCK START (Start control using OEM Remote) 933.SUBARU1 1.38.195.3 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 5: Pre-Installation And Application Warnings

    [4] Keysense Input: Connection is only needed if keysense is not recognized through data at the time of programming. See LED Diagnostics & Troubleshooting section for more details. [5] Diode: When using an external relay, use a 1N4002 diode or larger. 933.SUBARU1 1.38.195.3 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 6: Wiring Diagram

    Mandatory Connections Security Only Remote Start Only B281 - White 30-pin conn. (BCM, right of steering column) Refer to “Vehicle connections” for wire Remote Start + Security colors and location. 933.SUBARU1 1.38.195.3 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 7: Locating Components In The Vehicle

    Locating components in the vehicle 933.SUBARU1 1.38.195.3 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 8: Vehicle Connections

    No Connection No Connection H2/17 Black/White No Connection No Connection H2/18 Orange/Black BIU right of steering column, white 30 pin plug, pin 2 black/white Remote Start (+) Keysense Input Only 933.SUBARU1 1.38.195.3 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.
  • Page 9 Mandatory Starter Input (conn. side) Connection required for Starter Disable Only. H4/7 Violet (+) Starter Output (vehicle side) ignition switch, white 6 pin plug, pin 2 white/black Mandatory 933.SUBARU1 1.38.195.3 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.
  • Page 10 Green H6/4 Temperature sensor harness, 2-pin black connector (H7) Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color Connection H7/1 Black Temperature Sensor H7/2 Black Temperature Sensor 933.SUBARU1 1.38.195.3 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 11: Module Programming

    Learning procedure. However, when using a Hardwired Tach, the procedure is mandatory.    For more information, refer to the Tach Learning procedure section. * Your aftermarket remote may differ from the model shown in the illustrations. 933.SUBARU1 1.38.195.3 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.
  • Page 12 You have successfully completed the module programming sequence. 933.SUBARU1 1.38.195.3 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 13: Module Programming For Convenience Only (Skip Transponder)

    You have successfully completed the module programming sequence. 933.SUBARU1 1.38.195.3 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 14: Module Programming For Security-Only Installations

    Your aftermarket remote may differ from the model show in the illustration. You have successfully completed the module programming sequence. 933.SUBARU1 1.38.195.3 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 15: Pairing Remotes

    When used in conjunction with Directed SmartStart ® To enable D2D communication between the DS3+/DS4+ and the Directed SmartStart one of the following actions must be performed ® before providing power to the Directed SmartStart unit: ®...

  • Page 16: When Used In Conjunction With Smartstart

    DO NOT connect the Directed SmartStart ® 2-pin power harness when using the DS3+/DS4+. Power and ground will be provided by the D2D connector on the module. Refer to the Directed SmartStart ® documentation for further details. D2D port configuration Caution! Do not connect the Control Center (antenna) or any digital sensors (8504D) to the white D2D1 port.

  • Page 17: Manual Transmission

    Manual Transmission IMPORTANT! Directed does not approve nor support installations of manual transmission and remote starts on any electronic vehicles (EV), OEM Remote Start Activation firmware, vehicles with convertibles and/or removable tops, including but not limited to Jeep Wrangler, Honda S2000, Mazda Miata, and other such vehicles.

  • Page 18: Led Diagnostics And Troubleshooting

    Keysense was not supported in Data. Refer to "Installation (wiring diagrams & vehicle wiring reference Keysense not detected. charts)" to check the connections. Also Check CAN Connections. Flashes red x 9 933.SUBARU1 1.38.195.3 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.
  • Page 19 The smart key was not detected, which prevents the system from shutting down the vehicle. Flashes red x 3 Speed was detected. The vehicle was detected as moving, which prevents the system from shutting it down. Flashes red x 4 933.SUBARU1 1.38.195.3 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 20: Soft Reset

    DS3+: Release the programming button. The LED turns solid red. & Solid Release DS4+: Release the programming button. The LED turns ON blue for 1 second then solid red. & & Solid Solid x1 Sec Release 933.SUBARU1 1.38.195.3 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 21: Tach Learning Procedure (Not Needed With Virtual Tach)

    Therefore, there is no Over-Rev protection. If the vehicle attempts to remote start, but is unsuccessful, the remote start will keep the ignition on for the entire runtime period. 933.SUBARU1 1.38.195.3 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 22: Limited Lifetime Consumer Warranty

    This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. VOXX DEI LLC, 2351 J. Lawson Blvd., Orlando, Florida 32824 933.SUBARU1 1.38.195.3 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 23: Quick Reference Guide (Customer Copy)

    Factory remote. Press the Remote Start button on the transmitter.* • Aftermarket remote. • Directed SmartStart application via your smartphone. & The parking lights will flash once to indicate the Parking lights flash x1 Press Remote vehicle is now in Pit Stop Mode.
  • Page 24 The application enables a “Cloud-Connected Car” like never before, providing 2-way interaction with your vehicle. Connectivity is managed through the Directed Cloud Services (DCS) network linking car, app, end user, and the Internet.

Table of Contents