Directed 933.MIT3 Installation Manual
  1. Manuals
  2. Brands
  3. Directed Manuals
  4. Automobile Accessories
  5. 933.MIT3
  6. Installation manual
Directed 933.MIT3 Installation Manual

Directed 933.MIT3 Installation Manual

2012 mitsubishi lancer evolution
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
933.MIT3
DS3+ / DS4+
v2.11.195.3
2012 Mitsubishi Lancer Evolution

Advertisement

Table of Contents
loading

Related Manuals for Directed 933.MIT3

Summary of Contents for Directed 933.MIT3

  • Page 1 933.MIT3 DS3+ / DS4+ v2.11.195.3 2012 Mitsubishi Lancer Evolution...

  • Page 2: Table Of Contents

    Contents Introduction Vehicle function compatibilities Pre-installation and application warnings Wiring diagram Locating components in the vehicle Vehicle connections Module programming For Security-Only and Convenience-Only programming, see next sections. Module programming for convenience only (skip transponder) Module programming for security-only installations Pairing remotes Connecting the module 8556T Temperature Sensor...

  • Page 3: Introduction

    To configure via DirectLink DT (mobile app): 1. Follow and complete the wiring diagram(s) related to your installation through the app. 2. When installation is complete, select Configure DS4/DS4+. 3. Follow the on-screen instructions. 933.MIT3 2.11.195.3 2012 Mitsubishi Lancer Evolution ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 4: Vehicle Function Compatibilities

    Brake Status (foot brake) 3x LOCK START (Start control using OEM Remote) E-Brake Status 3x LOCK STOP (Stop control using OEM Remote) Ignition Status Accessory Activation Ignition Activation 933.MIT3 2.11.195.3 2012 Mitsubishi Lancer Evolution ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 5: Pre-Installation And Application Warnings

    [2] Siren: The siren is only required when enabling the security features during module flashing. [3] Security-Only installations: Refer to the "Locating components in the vehicle" section for the optional starter disable connection. 933.MIT3 2.11.195.3 2012 Mitsubishi Lancer Evolution ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 6: Wiring Diagram

    Lt. Blue, pin 5 (black 2-pin conn. Mandatory Connections at ECU) Automatic Transmission Only Security Only C-311 Remote Start Only (white 20-pin conn. at ECU) Remote Start + Security 933.MIT3 2.11.195.3 2012 Mitsubishi Lancer Evolution ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 7: Locating Components In The Vehicle

    Refer to the Vehicle connections section for wire and Starter (conn. side) connector details. Starter (veh. side) Legend: Mandatory Connections Security Only Remote Start Only Remote Start + Security 933.MIT3 2.11.195.3 2012 Mitsubishi Lancer Evolution ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 8: Vehicle Connections

    (+) Ignition Sense Input No Connection H2/13 Violet (+) Door Trigger Input No Connection H2/14 Brown (+) Brake Input No Connection H2/15 White/Blue (-) Activation Input No Connection 933.MIT3 2.11.195.3 2012 Mitsubishi Lancer Evolution ©2022 VOXX•DEI LLC. All rights reserved.
  • Page 9 Starter Input (conn. side) No Connection H4/7 Violet (+) Starter Output (vehicle side) No Connection H4/8 Orange (+) Accessory Output No Connection H4/9 Red/White (+) 12 Volt Input No Connection 933.MIT3 2.11.195.3 2012 Mitsubishi Lancer Evolution ©2022 VOXX•DEI LLC. All rights reserved.
  • Page 10 (+) 12 Volt Temperature sensor harness, 2-pin black connector (H7) Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color Connection H7/1 Black Temperature Sensor H7/2 Black Temperature Sensor 933.MIT3 2.11.195.3 2012 Mitsubishi Lancer Evolution ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 11: Module Programming

    For more information, refer to the Tach Learning procedure section. * Your aftermarket remote may differ from the model shown in the illustrations. You have successfully completed the module programming sequence. 933.MIT3 2.11.195.3 2012 Mitsubishi Lancer Evolution ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 12: Module Programming For Convenience Only (Skip Transponder)

    Your aftermarket remote may differ from the model shown in the illustrations. You have successfully completed the module programming sequence. 933.MIT3 2.11.195.3 2012 Mitsubishi Lancer Evolution ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 13: Module Programming For Security-Only Installations

    Your aftermarket remote may differ from the model show in the illustration. You have successfully completed the module programming sequence. 933.MIT3 2.11.195.3 2012 Mitsubishi Lancer Evolution ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 14: Pairing Remotes

    When used in conjunction with Directed SmartStart ® To enable D2D communication between the DS3+/DS4+ and the Directed SmartStart one of the following actions must be performed ® before providing power to the Directed SmartStart unit: ®...

  • Page 15: When Used In Conjunction With Smartstart

    DO NOT connect the Directed SmartStart 2-pin power harness when using the DS3+/DS4+. Power and ground will be provided by the ® D2D connector on the module. Refer to the Directed SmartStart documentation for further details. ® D2D port configuration Caution! Do not connect the Control Center (antenna) or any digital sensors (8504D) to the white D2D1 port.

  • Page 16: Manual Transmission

    Manual Transmission IMPORTANT! Directed does not approve nor support installations of manual transmission and remote starts on any electronic vehicles (EV), OEM Remote Start Activation firmware, vehicles with convertibles and/or removable tops, including but not limited to Jeep Wrangler, Honda S2000, Mazda Miata, and other such vehicles.

  • Page 17: Led Diagnostics And Troubleshooting

    The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Refer to “Installation MUX not detected. (wiring diagrams & vehicle wiring reference charts)” to check the connections. Flashes red x 7 933.MIT3 2.11.195.3 2012 Mitsubishi Lancer Evolution ©2022 VOXX•DEI LLC. All rights reserved.
  • Page 18 The smart key was not detected, which prevents the system from shutting down the vehicle. Flashes red x 3 Speed was detected. The vehicle was detected as moving, which prevents the system from shutting it down. Flashes red x 4 933.MIT3 2.11.195.3 2012 Mitsubishi Lancer Evolution ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 19: Soft Reset

    DS3+: Release the programming button. The LED turns solid red. & Solid Release DS4+: Release the programming button. The LED turns ON blue for 1 second then solid red. & & Solid Solid x1 Sec Release 933.MIT3 2.11.195.3 2012 Mitsubishi Lancer Evolution ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 20: Tach Learning Procedure (Not Needed With Virtual Tach)

    Therefore, there is no Over-Rev protection. If the vehicle attempts to remote start, but is unsuccessful, the remote start will keep the ignition on for the entire runtime period. 933.MIT3 2.11.195.3 2012 Mitsubishi Lancer Evolution ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 21: Limited Lifetime Consumer Warranty

    This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. VOXX DEI LLC, 2351 J. Lawson Blvd., Orlando, Florida 32824 933.MIT3 2.11.195.3 2012 Mitsubishi Lancer Evolution ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 22: Quick Reference Guide (Customer Copy)

    3 possible ways you can send commands to your vehicle, using the: in Park (P). • Factory remote. • Aftermarket remote. Press the Remote Start button on the transmitter.* • Directed SmartStart application via your smartphone. & Parking lights The parking lights will flash once to indicate the vehicle is Press...
  • Page 23 The simple graphical interface gives you control over the following features of your installed remote start system or security with remote start system: This system is compatible with Directed SmartStart. For a complete list of supported features, please visit www.mysmartstart.com.

Table of Contents