Breville the Bambino Plus BES500BTR1BUS1 Instruction Book page 12

PRE-PROGRAMED SHOT VOLUME
– 2 CUP
Press the 2 CUP button once, the button will
flash indicating that is has been selected. A
preset double espresso volume of approximately
2oz / 60mls will be extracted. The machine will
automatically stop once the pre-set volume has
been extracted.
NOTE
Pressing the 1 CUP or 2 CUP buttons during
a programmed espresso will immediately
stop the extraction.
MANUAL PRE-INFUSION
+
AND SHOT VOLUME
Press and hold the 1 CUP or 2 CUP button
for the desired pre-infusion time. Release the
button to start the extraction. Press the flashing
button again to stop the extraction.
PROGRAMMING SHOT VOLUME
Press and hold the 1 CUP and 2 CUP buttons
for 2 seconds, the buttons will illuminate
and flash.
+
To set the 1 CUP volume:
• Press the 1 CUP button to start the extraction.
• Press the 1 CUP button again to stop the
extraction. The modified volume will be saved.
To set the 2 CUP volume, follow the above
steps but select the 2 CUP button to start and
stop the extraction.
12
SETTING THE MILK TEMPERATURE
The machine has 3 milk temperature settings;
1 – Warm
2 – Ideal
3 – Hot
When turning on the espresso machine, the
milk temperature setting will default to the last
chosen setting. Press the MILK TEMP button
until the desired temperature is illuminated.
SETTING THE MILK FOAM
The machine has 3 milk foam settings;
1 – Low
2 – Medium
3 – High
When turning on the machine, the milk foam
setting will default to the last chosen setting.
Press the MILK FOAM button until the desired
foam setting is illuminated.
OFF
TEXTURING MILK
Different brands and types of milk and milk
alternatives will texture differently. You may
need to adjust the foam level according.
NOTE
Prior to texturing milk, it is recommended to
momentarily purge the steam wand. To do this
press the STEAM button to start purging and
press it again to stop.
2s
3
2
1
3
2
1
3
2
1
3
2
1