GreenWorks 21332 Owner's Manual page 13

ASSEMBLY INSTRUCTION
BATTERY
IMPORTANT! The battery pack is not charged when it is purchased. Before using the trimmer for
precautions, and follow the inst ructions in the Battery Charger section.
To remove (See Figure 6.)
1. Press the latch button (1) on the battery pack down and hold.
2. trimmer
NOTE:
may require a strong pull to remove it.
To install (See Figure 6.)
1. Align the tongue (3) of the battery pack with the cavity in the blower housing.
trimmer
2.
3. Push the battery pack into the handle until the latch locks into place.
4. Do not use force when inserting the battery pack. It should slide into position and "click".
W A R N I N G
• Replace the battery pack or the charger immediately if the battery case or charger cord is
damaged.
• Verify that the switch is in the OFF position before inserting or removing the battery pack.
• Verify that the battery pack is removed and the switch is in the OFF position before inspecting,
adjusting, or performing maintenance on any part of the blower.
• Read, understand, and follow the instructions contained in the section entitled Charging
Procedure.
2
12
to read all safety
3
1
Fig. 6