Advertisement
Using Arbor Press
Shaft
Figure G: Raising Rack Press
1. Raise Rack Press up by turning Handle
clockwise as shown in Figure G.
2. Turn the Plate until the appropriate width opening
is centered under Rack Press. The appropriate
width depends upon what you are using the
press for. To cover opening beneath the Rack
Press, rotate the Plate until one of the four solid
parts of Plate is underneath the Rack Press.
Page 8
Rack Press
Plate
For technical questions, please call 1-888-866-5797.
3. Place the part to press onto the Plate.
4. Turn Handle counter clockwise to lower Rack Press
until bottom of Rack Press contacts the part.
5. Place downward pressure on Handle
to press the part as needed.
6. Release pressure on Handle and raise
the Rack Press to remove the part.
Item 59766
Advertisement
