Important Installation Instructions - RADEMACHER RolloPort S2 Translation Of The Original Operating And Assembly Manual

Important installation instructions

Important instructions for a safe installation.
Follow all installation instructions carefully.
An incorrect installation can lead to serious
injuries.
Before installation check...:
◆ ...whether your door operator is suitable for the type
of garage door and the garage door height.
◆ ...that the door is in a perfect mechanical state. The
door must be smooth running and be balanced.
Check whether it opens and closes properly;
Open the door approx. 1 metre and let go. A
balanced door should now remain in this position.
If not, have your door adjusted by a specialist
company.
◆ The door operation must not be hindered by in-
correctly adjusted springs or by incorrectly func-
tioning door suspensions or door constructions.
Before installing the drive...,
◆ ....remove all unnecessary ropes or chains and disable
any equipment, such as locks, not needed for powered
operation.
During installation there is a danger of injury
STOP
due to the unsecured door falling suddenly.
◆ During the installation work, ensure that there are
no persons in the swivelling area of the garage door.
12
Faulty installation can result in serious ac-
cidents and injuries.
◆ Fit the actuator for the emergency release at a height
of less than 1.8 metres.
◆ Use only the enclosed mounting materials and only
original spare parts and original accessories.
◆ Any existing door locking devices already fitted to
the door may hinder the correct functioning of the
door and must therefore be removed.
◆ Movable parts of the garage door must not extend
into public footpaths or cycle paths.
◆ Poor lighting hinders the installation work and can
result in injuries. Ensure that there is adequate
lighting during installation work.
◆ It is possible that during the installation work, you
may not be able to open the door for a short period
of time.
◆ This drive is not to be used with doors having openings
exceeding 50 mm in diameter or having edges or
protruding parts a person could grip or stand on.
◆ Permanently fix the label concerning the manual release
adjacent to its actuating member.
◆ Attach all labels so that they are clearly legible.
◆ The manufacturer is not liable for damage which
occurs due to incorrect or non-compliant use (see
warranty conditions).
EN