Table of Contents
Advertisement
2. Tip: Take any necessary measures to protect
your floor before you begin. Place a soft
cloth or a piece of cardboard on the floor
where you will assemble the rower.
Make sure that the Row Bar (19) is securely
inserted into the Row Bar Hook (88).
With the help of a second person, tip the
Frame (1) upside down so that the shipping
bracket (A) is resting on your floor. Have the
second person hold the Frame steady until
step 5 is completed.
Orient the Front Stabilizer (4) as indicated by the
sticker, and attach it to the Frame (1) with two
M10 x 20mm Screws (101); firmly tighten the
Screws.
3. Identify the Right Footrest (29) and the Right
Footrest Bottom (31).
Attach the Right Footrest Bracket (27) to the
right side of the Frame (1) with four M10 x 35mm
Screws (100); start all the Screws, and then
tighten them.
Then, attach the Right Footrest Bottom (31)
to the Right Footrest Bracket (27) with two
M4 x 19mm Screws (104).
Repeat this step on the other side of the
rower.
2
101
4
1
3
104
104
7
19
88
A
31
1
100
27
29
Advertisement
Table of Contents
