Connections - Brother FAX-1800C Owner's Manual

If You Do Not Subscribe to Distinctive Ring Service:
You must plug your TAD into the EXT. jack of your fax machine. If your TAD
is plugged into a wall jack, both your machine and the TAD will try to control
the phone line. (See illustration on page 2-14.)
Do not connect a TAD elsewhere on the same phone line (unless you have
the Distinctive Ring service).

Connections

The external TAD must be plugged into the back side of the fax machine, in the
jack labeled EXT. Your fax machine cannot work properly if you plug the TAD
into a wall jack (unless you are using Distinctive Ring).
1
Plug the telephone line cord from the wall jack into the back side of the fax
machine, in the jack labeled LINE.
2
Plug the telephone line cord from your external TAD into the back side of the
fax machine, in the jack labeled EXT. (Make sure this cord is connected to the
TAD at the TAD's telephone line jack, and not its telephone set jack.)
3
Set your external TAD to four rings or less. (The fax machine's Ring Delay
setting does not apply.)
4
Record the outgoing message on your external TAD (see page 2-15).
5
Set the TAD to answer calls.
6
Set the Receive Mode to
(See
Choosing the Receive Mode
YES !
TAD:ANSWER
, page 6-1.)
A S S E M B L Y A N D C O N N E C T I O N S
NO !
MACH..
TAD
TAD
2 - 14