User Menu - Sony Power HAD EX DXC-D55PK Operating Instructions Manual

USER Menu

The USER menu consists of five pages (factory
setting), on which frequently used items of the
OPERATION, PAINT, MAINTENANCE, and FILE
menus are assigned. You can change the assigned
items using the USER MENU CUSTOMIZE menu.
Structures and setting values of the USER menu
Submenu title Page
<USER PAGE 1> U1
<USER PAGE 2> U2
<USER PAGE 3> U3
<USER PAGE 4> U4
<USER PAGE 5> U5
Setting item: Selectable
Initial value value
A.IRIS OVERRIDE: 0 –99 to 0 to 99
DTL LEVEL: 0 –99 to 0 to 99
MASTER BLACK: 0 –99 to 0 to 99
PRESET MATRIX: STD STD, HI SAT,
FL
SCREEN MODE: 16:9 16:9, 4:3
SCENE STANDARD:
EXECUTE
SCENE FILE 1
SCENE FILE 2
SCENE FILE 3
SCENE FILE 4
SCENE FILE 5
SKIN DTL SW: OFF ON, OFF
SKIN DTL SET:
EXECUTE
SKIN DTL LEVEL: 50 0 to 50 to 99
SAFETY ZONE SW: ON ON, OFF
CENTER MARKER SW: ON, OFF
ON
SC PHASE: 0 0 to 999
H PHASE COARSE: 0 –99 to 0 to 99
H PHASE FINE: 0 –99 to 0 to 99
<USER PAGE 1>
A.IRIS OVERRIDE
DTL LEVEL
MASTER BLACK
PRESET MATRIX
SCREEN MODE
Remarks
To adjust the reference value for auto aperture
To adjust the detail (contour correction) level
To adjust the master black level
To adjust the preset matrix
STD: Standard color tone
HI SAT: For more vivid picture (The color
intensity increases a little.)
FL: For shooting under fluorescent light, to
prevent the skin color's becoming greenish
To select the aspect ratio of the output signal
— To select if the standard settings are to be used
or not
— To read a scene file set with the FILE menu.
(For details on settings, see "FILE menu" on
—
page 70.)
—
—
—
To turn skin tone detail on/off
— To execute the skin set (The box cursor
appears at the center of the screen. Move the
cursor to where you wish to execute the skin set
by turning the MENU dial, then press it to
execute the skin set. For about 3 seconds after
the MENU dial is pressed, a zebra pattern will
be displayed to indicate the location where the
skin tone is activated.)
To adjust the detail level when skin-tone detail
is set to ON. At 99, the maximum effects are
obtained.
To turn the safety-zone display on/off
To turn the center marker on/off
To adjust the SC phase (Setting when gen-
locked)
To adjust the horizontal phase (Setting when
gen-locked)
To fine-adjust the horizontal phase (Setting
when gen-locked)
Chapter 4 Viewfinder Screen Indications and Menus
U1
: 0
: 0
: 0
: STD
: 16:9
57