Programming Remote Transmitter(S) - Fortin ORBITF2400 Quick Installation Manual

PROGRAMMING REMOTE TRANSMITTER(S)

The system can learn up to a maximum of 4 transmitters.
Any transmitters can be stored in more than 1 memory slot.
When a 5th transmitter is learned the 1st remote is erased (FIFO).
STEP 1 STEP 2
Turn the Ignition
OFF.
Turn Press and hold the
the valet switch until
Igni- the parking lights
tion turn ON, the horn/
ON. siren will chirp.
ERASES ALL REMOTES THAT HAVE BEEN PROGRAMMED AND RESETS ALL FUNCTIONS BACK TO DEFAULT.
STEP 1
Disarm
the system
(The
antenna Turn
led must the
not be Ignition
ON.
flashing,
see enter/
exit valet
mode
p.6).
Within 5 sec.
STEP 3
Turn the
Ignition ON.
Press and release the valet
switch five time.
The parking lights will flash
and the horn/siren will chirp
each time to confirm.
x5
STEP 2
OR OR
Press and
hold the valet
switch or the
antenna but-
ton until the
Parking lights
turn ON, the
horn/siren
will chirp.
STEP 4
Press and
release
the brake
x4 pedal four
The LED
times.
will turn
ON.
Press and
release
the brake
pedal
x1
once.
STEP 3 STEP 4
Press
and
release
X1
the valet
switch
or the
antenna
button
23
TIMES
.
STEP 5
On each Transmitter press
and release the
then press and release the
The
LED
button.
will
flash
The LED will stop
rapidly.
flashing for a
second confirming
programming.
STEP 5
OR
Press and
hold the
Press valet switch
and or the
release antenna
the button for
5 seconds
brake-
pedal The Parking
once. lights will
flash to
confirm.
STEP 6
button
Turn the
Ignition
OFF to exit
program-
ming.
STEP 6
Turn the
Ignition
OFF
to exit
program-
ming.
. The
Parking
lights
will flash
4 times.
PAGE 2