Printer Software Specifications - Canon imageRUNNER ADVANCE 8500 Series Manual

Table of Contents

Advertisement

6.26 Printer Software Specifications

Item
Operating Modes
PCL
PS
Resident Fonts
Direct Print Kit
PCL5c, PCL6
Printable Area
PostScript 3
NOTE
• When printing in the Expand Print Region and Print mode, the printable area is
enlarged. The upper margin becomes 1/8" (2.5 mm), the lower margin becomes
1/8" (2.5 mm), and the side margins become 1/8" (2.5 mm).
• When an original has data that extends all the way to the edges, even if the
Expand Print Region and Print mode are selected, the periphery of the data may
be cut off. In this case, specify the reduction ratio in the printer driver, so that the
data is not cut off, and try to print again.
53 The optional PCL International Font Set must be activated to use Andale and WorldType Collection, or Andale
Mono WT fonts.
54 These fonts are for use with PDF files.
Version 7
imageRUNNER ADVANCE 8500 and 8500 II Series Customer Expectations Document
imageRUNNER ADVANCE 8500 and 8500 II Series Customer Expectations Document
Auto, PS, PCL, XPS, Imaging, and PDF
93 Scalable fonts, 2 OCR fonts, and Andale Font
Simplified Chinese, and Traditional Chinese)
136 Scalable fonts
Japanese Fonts
European Fonts
Reduced to 1/6" (4.23 mm) from the top, bottom, left, and right edges
of the paper.
Reduced to 1/6" (4 mm) from the top, bottom, left, and right edges of
the paper.
Specifications
54
: 2 Heisei fonts (Heisei Mincho W3 and Heisei Kaku
Gothic W5)
54
: 136 fonts
53
(Japanese, Korean,
Page 80

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imagerunner advance 8500 ii series

Table of Contents