ICP DAS USA UA-7200 Series Quick Start

Download this manual

Packing List

The shipping package

UA-7231M

Technical Resources

How to search for drivers, manuals and spec information on ICP DAS website.

 For Mobile Web

 For Desktop Web

UA-7200 Series Quick Start

includes

this document and the following items:

Pin Terminal x 16

v1.1, 01/2023

MicroSD Card Screw Driver

Technical Support

service@icpdas.com

https://www.icpdas.com

P.1

Page 1 UA-7200 Series Quick Start v1.1, 01/2023 Packing List includes The shipping package this document and the following items: Pin Terminal x 16 MicroSD Card Screw Driver UA-7231M Technical Resources How to search for drivers, manuals and spec information on ICP DAS website.
Page 2 Preparations for Devices Prepare one UA-7200, Ex: UA-7231M, and the following: 1. PC/NB: Can connect to the network and set the network 2. Ethernet Switch (Ex: NS-205A or PoE Switch NSM-208PSE) 3. Power Supply: +12 ~ +48 VDC (Ex: MDR-60-24) Hardware Connection Connect the UA-7200 with the RJ-45 Ethernet port to an Ethernet switch/hub (Fig.2 for PoE Switch) and PC.
Page 3 Network Connection UA-7200 Factory Default Settings 192.168.255.1 Assign UA-7200 a new IP setting 255.255.0.0 Network Mask according to your case. 192.168.1.1 Gateway After login, change root Username Web UI the username / Account password to use root Password other functions. Change PC’s IP setting to be in the same network with UA.
Page 4 Change the default Username/Password in the 【System Setting】【Account Setting】 to use other functions. Click 【System Setting】【Time Setting】, check if the UA time is correct. If not, modify or set Time Synchronization. Click【System Setting】【Network Setting】【Network Setting(LAN1)】to change the IP setting by user network. Save the IP setting, restore the PC original IP settings, and type the UA new IP in the browser to login the Web UI of UA-7200.

Ua-7231m