Table of Contents
Advertisement
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
18 To Remove the Hotplate Electrode
Leads
Disconnect from the electricity supply.
Pull the unit forward to access the rear of the
appliance. Remove the hotplate - see 2. Remove the
cover box and disconnect all HT leads at the
generator. Disconnect the lead at the electrode. Pull
the sleeved bundle of HT leads up through the rear
upright. Pull the appropriate lead from the sleeve
and push in the replacement. Replace the leads in
the rear upright. Re-connect the leads at the
generator and oven electrode. Re-assemble in
reverse order and check ignition.
19 To Remove Oven Inner Back
Open the oven door. For the LH oven unscrew the 2
thermostat phial fixing screws. Remove the fixings
that secure the inner back to the oven rear. Lift the
removable panel away. Re-assemble in reverse
order. Ensure that the retaining fixings are fully
tightened.
20 To Replace an Oven Fan
Disconnect the appliance from the electricity
supply. Pull the unit forward to access the cover
boxes at the rear of the appliance. Remove the
fixings that secure the cover and lift it clear.
Remove the fan wiring, noting the connection
positions. Remove the inner back as detailed in
Section 22. Hold the fan blades and undo the centre
nut (LH thread), brass washers, fan blade and
circlip. Undo the fixings that retain the fan and
remove it from the cavity rear. Fit the replacement
and re-assemble parts in reverse order. Check that
the oven operates satisfactorily.
21 To Remove an Oven fan Element
Disconnect the appliance from the electricity
supply. Pull the unit forward to access the cover
boxes at the rear of the appliance. Remove the
fixings that secure the cover and lift it clear. Undo
the terminal connections noting their positions.
Remove the inner back as detailed in Section 22.
Remove the fixings that secure the element within
the oven and lift the element away carefully. Fit the
replacement element and re-assemble parts in
reverse order. Check that the oven operates
correctly.
SERVICING - WARNING
22 To Remove the LH Oven Bottom and
Top Elements
Disconnect from the electricity supply.
Bottom Element
Pull the cooker forward to access the cover boxes at
the rear of the unit. Remove the fixings that secure
the cover and lift it clear.
Remove the 2 screws 'A' and allow the plate to drop
down. Remove the 2 screws B, lower the upper
plate and remove through the slot in the cooker
back.
Undo the terminal connections, noting their
positions.
Remove the element fixings and withdraw element.
Replace the element and re-assemble parts in
reverse order.
Top Element
Open the LH oven door and undo the fixings that
secure the heat shield. Remove the top element
bracket fixings and withdraw element. Replace the
element and re-assemble parts in reverse order.
Check that the oven operates satisfactorily.
36
Advertisement
Table of Contents
