Datavideo PTC-300 Instruction Manual page 55

rear panel of the HS-1300. After that, you can see the image which is shot by
the PTC-300 is displayed in the MULTIVIEW window of the HS-1300 correctly.
For SDI: The SDI IN 1 to SDI IN 4 interfaces which are located on the rear panel
of the HS-1300 represent the MULTIVIEW window's Input 1 to Input 4.
For HDMI: The HDMI IN 1 to HDMI IN 2 interfaces which are located on the
rear panel of the HS-1300 represent the MULTIVIEW window's Input 5 to Input
6.
Note: Datavideo's SE-650, HS-1200 MU and HS-1300 switchers support 1080i
video format only. So, the 1080p video format is not supported by the above-
mentioned switchers. If you want to connect the PTC-300 camera to the SE-
650 or the HS-1200 MU switcher, please remember to select the "OSD" item
from "Video Video Format" in the PTC-300 web UI. Moreover, please use
the OSD menu of the PTC-300 camera and the OSD menu of the above-
mentioned switchers to adjust them in the same video standard before
connecting to prevent the video format incompatible issue and the issue that
the video that is shot by the PTC-300 can not be displayed normally in the
MULTIVIEW window of the above-mentioned switchers.
55