Table of Contents
Advertisement
How to do the SRT Stream by Using the PTC-300Camera and
vMix Software
There are two modes for the SRT streaming including the Caller Mode and the
Listener Mode. Please see following steps for realizing operation steps for the
vMix.
If the PTC-300 is set in Listener Mode
Note: Due to the fact that the PTC-300 supports SRT Listener Mode only
currently. So, please set the Vmix in SRT Caller Mode.
1. At first, please click the "Vmix(x64)" from the Start Menu to open the Vmix
software.
2. After that, you will see the Vmix main interface which is shown in the
following diagram.
102
Advertisement
Table of Contents
