Datavideo PTC-300 Instruction Manual page 103

3. Please go back to the PTC-300 interface to make sure that the "SRT" option
in the SRT Settings is "ON". Moreover, the default value of the "SRT Port" is
"4578". The "SRT Encry" drop-down menu allows you to select your desired
SRT Encryption way including AES-128, AES-192 and AES-256. The default
value of the "SRT Encry" option is "Off". In this section, we will take AES-256 as
an example. If you need to set an SRT password, please enter your desired SRT
password in the "SRT Password" column, it needs a 10-digit or above number.
The default SRT Password is "1234567891". After the setting for the SRT
Password is finished, please press the "Apply" button which is located on the
bottom side of the Web UI to apply the new setting.
103