Table of Contents
Advertisement
Level 1
Level 2
WLAN
TCP/IP
Setup Wizard
WLAN Assistant
WPS
WPS w/ PIN Code
WLAN Status
MAC Address
Wi-Fi Direct
Push Button
PIN Code
Manual
Group Owner
Device
Information
Status
Information
I/F Enable
Web Connect
Proxy Settings
Settings
WLAN Enable
-
Network Reset
-
Level 3
APIPA
IPv6
-
-
-
-
Status
Signal
SSID
Comm. Mode
-
-
-
-
-
Device Name
SSID
IP Address
Status
Signal
-
Proxy Connection
Address
Port
User Name
Password
-
-
Descriptions
Set the machine to allocate the IP address from
the link-local address range automatically.
Turn the IPv6 protocol on or off.
Configure your wireless network settings
manually.
Configure your wireless network settings using
the Brother installation disc.
Configure your wireless network settings using
the one-button push method.
Configure your wireless network settings using
WPS with a PIN.
View the current wireless network status.
View the current wireless network signal
strength.
View the current SSID.
View the current Communication mode.
View the machine's MAC address.
Configure your Wi-Fi Direct network settings
using the one-button push method.
Configure your Wi-Fi Direct network settings
using WPS with a PIN code.
Configure your Wi-Fi Direct network settings
manually.
Set your machine as the Group Owner.
View your machine's device name.
View the Group Owner's SSID.
When the machine is not connected, the LCD
displays Not Connected.
View your machine's current IP Address.
View the current Wi-Fi Direct network status.
View the current Wi-Fi Direct network signal
strength.
When your machine acts as Group Owner, the
LCD always indicates a strong signal.
Turn the Wi-Fi Direct connection on or off.
Change the Web connection settings.
Turn the wireless network connection On or Off.
Restore all network settings back to the factory
settings.
660
Advertisement
Table of Contents
