Table of Contents
Advertisement
Home >
Paper Handling
Tray
Load Envelopes in the Paper Tray
•
If the [Check Paper] setting is set to [On] and you pull the paper tray out of the machine, a message
appears on the LCD asking if you want to change the paper type and paper size.
•
You can load envelopes in a variety of sizes. See Related Information: Paper Type and Paper Size for
Each Operation.
•
When you load a different paper size in the tray, you must change the Paper Size setting in the machine or
the paper size setting on your computer.
•
Before loading envelopes in the tray, press the corners and sides of the envelopes to make them as flat as
possible.
1. If the paper support flap (1) is open, close it, and then close the paper support (2).
2. Pull the paper tray completely out of the machine.
3. Open the output paper tray cover (1).
1
4. Load up to 10 envelopes in the paper tray with the printing surface face down. Loading more than 10
envelopes may cause paper jams.
>
Load Paper
>
Load Paper in the Paper Tray
1
2
> Load Envelopes in the Paper
38
Advertisement
Table of Contents
