Brother MFC-J815DW Online User's Manual page 414

Home > Security > Network Security Features
Directory Authentication Using Web Based Management
Configure Active Directory Authentication Using Web Based
Management
Related Models: MFC-J995DW
Active Directory authentication supports Kerberos authentication and NTLMv2 authentication. You must
configure the SNTP protocol (network time server) and DNS server configuration for authentication.
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
3. If the machine prompts you for a password, type it, and then click
4. Click the Administrator tab.
5. Click the User Restriction Function menu in the left navigation bar.
6. Select Active Directory Authentication.
7. Click Submit.
8. Select the Active Directory Authentication menu in the left navigation bar.
9. Configure the following settings:
Option
Storage Fax RX Data
Remember User ID
Active Directory Server
Address
Active Directory Domain
Name
Protocol & Authentication
Method
Get User's Home Directory
LDAP Server Port
LDAP Search Root
10. Click Submit.
Related Information
• Use Active Directory Authentication
> Use Active Directory Authentication
Description
Select this option to store incoming fax data. You can print all incoming fax
data after you log on to the machine.
Select this option to save your User ID.
Type the IP address or the server name (for example: ad.example.com) of
the Active Directory Server.
Type the Active Directory domain name.
Select the protocol and authentication method.
Select this option to obtain your home directory as the Scan to Network
destination. (available only for LDAP + kerberos authentication method)
Type the port number to connect the Active Directory server via LDAP
(available only for LDAP + kerberos authentication method).
Type the LDAP search root (available only for LDAP + kerberos
authentication method).
> Configure Active
.
407