Table of Contents
Advertisement
Error Message
Paper Size Mismatch
Replace Ink
The maximum number of
devices are already
connected using Wi-Fi
Direct.
Tray not detected
Tray Settings
Unable to Clean XX
Unable to Init. XX
Unable to Print XX
Cause
The paper size setting does not match the
size of paper in the tray.
-OR-
You did not set the paper guides in the
tray to the indicators for the paper size
you are using.
One or more of the ink cartridges have
reached the end of their lives. The
machine will stop all print operations.
While memory is available, black and
white faxes will be stored in the memory.
If the sending machine has the ability to
convert it, the color fax will be stored in
the memory as a black and white fax.
The maximum number of mobile devices
are already connected to the Wi-Fi Direct
network when the Brother machine is the
Group Owner (G/O).
The paper tray is not completely inserted. Slowly push the paper tray completely into
Paper or a foreign object has prevented
the paper tray from being inserted
correctly.
This message is displayed when the
setting to confirm the paper type and size
is enabled.
The machine has a mechanical problem.
-OR-
A foreign object, such as a paper clip or a
piece of ripped paper, is in the machine.
Action
See Related Information: Print a Fax
Stored in the Machine's Memory.
1. Check that the paper size you chose
on the machine's display matches the
size of the paper in the tray.
See Related Information: Change the
Paper Size and Paper Type.
2. Make sure you loaded the paper in a
Portrait position, by setting the paper
guides at the indicators for your paper
size.
See Related Information: Load Paper.
3. After you have checked the paper size
and the paper position, press c.
If you are printing from your computer,
make sure the paper size you chose in
the printer driver matches the size of
paper in the tray.
See Related Information: Print Settings
(Windows) or Print Options (Mac).
Replace the ink cartridges.
See Related Information: Replace the Ink
Cartridges.
•
You can still scan even if the ink is low
or needs to be replaced.
After the current connection between your
Brother machine and another mobile
device has shut down, try to configure the
Wi-Fi Direct settings again. You can
confirm the connection status by printing
the Network Configuration Report.
See Related Information: Print the
Network Configuration Report.
the machine.
Pull the paper tray out of the machine,
and remove the jammed paper or foreign
object. If you cannot find or remove the
jammed paper, see Related Information:
Printer Jam or Paper Jam.
To not display this confirmation message,
change the setting to Off.
See Related Information: Change the
Check Paper Size Setting.
Open the scanner cover and remove any
foreign objects and paper scraps from
inside the machine. If the error message
continues, disconnect the machine from
the power for several minutes, and then
reconnect it.
See Related Information: Paper is
Jammed Inside and in the Front of the
Machine (Jam A Inside/Front).
528
Advertisement
Table of Contents
