BOMANN KG 7333 Instruction Manual page 20

 Do not modify the appliance plug. If the plug does
not fit properly to the outlet, let install a proper
outlet by an authorized specialist.
 The accessibility of the power plug must be en-
sured to disconnect the appliance from the power
supply in case of emergency.
 Make sure that the voltage supply matches the
specifications on the rating label before connect-
ing.
 Connect the mains cable to a properly installed
and earthed wall outlet.
 If the plug after installation is not accessible, a
corresponding disconnect device must be availa-
ble to meet the relevant safety regulations.
Reversing the door opening
If required, the door openings can be moved from the
right (supplied condition) to the left side.
WARNING:
When replacing the door stops, the appliance must
be disconnected from the power supply first.
NOTE:
 Ask another person to assist.
You possibly need:

driver as well as a thin-blade screwdriver.
*Delivery scope!

Keep the parts to be replaced for another possible
door stop change.
20
screw wrench, Phillips screw-