Alliance Laundry Systems ADEE8B BLACK Installation Manual
Alliance Laundry Systems ADEE8B BLACK Installation Manual

Alliance Laundry Systems ADEE8B BLACK Installation Manual

Advertisement

Quick Links

DRYER
INSTALLATION GUIDE
ADEE8B BLACK (ELECTRIC)
ADGE8B BLACK (GAS)
Need More info?
Call 1300 927 437
speedqueen.com.au

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADEE8B BLACK and is the answer not in the manual?

Questions and answers

Summary of Contents for Alliance Laundry Systems ADEE8B BLACK

  • Page 1 DRYER INSTALLATION GUIDE ADEE8B BLACK (ELECTRIC) ADGE8B BLACK (GAS) Need More info? Call 1300 927 437 speedqueen.com.au...
  • Page 2 Installation Instructions for Dryers Original Instructions Keep These Instructions for Future Reference. CAUTION: Read the instructions before using the machine. (If this machine changes ownership, this manual must accompany machine.) Part No. D514685R5 www.alliancelaundry.com August 2017...
  • Page 3 These conditions will obstruct clothes dryer airflow and increase the risk of fire. W729R1 © Copyright, Alliance Laundry Systems LLC - Part No. D514685R5 DO NOT COPY or TRANSMIT...
  • Page 4 Perm Press Automatic cycle with High Temperature and Dry- ness Dry at the rated load capacity of 7 kg. © Copyright, Alliance Laundry Systems LLC - Part No. D514685R5 DO NOT COPY or TRANSMIT...
  • Page 5: Table Of Contents

    Installer Checklist.................19 © Copyright 2017, Alliance Laundry Systems LLC All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher.
  • Page 6: Dimensions

    NOTE: Exhaust openings are 102 mm [4 inch] metal * With leveling legs turned into base. ducting. Gas Models DRY2639N_SVG 1. 3/8 in. NPT Gas Connection © Copyright, Alliance Laundry Systems LLC - Part No. D514685R5 DO NOT COPY or TRANSMIT...
  • Page 7 For maximum drying per- formance, we recommend that more clearance be al- lowed around the dryer than the clearances that are lis- ted throughout this manual. © Copyright, Alliance Laundry Systems LLC - Part No. D514685R5 DO NOT COPY or TRANSMIT...
  • Page 8: Installation

    1. Position and level the dryer. Figure 2 2. Connect dryer to exhaust system. 3. For gas models only, connect the gas supply pipe. Check for gas leaks. © Copyright, Alliance Laundry Systems LLC - Part No. D514685R5 DO NOT COPY or TRANSMIT...
  • Page 9 Front View (Closet Door) 2 (G) DRY2637N_SVG 1. Closet Door 2. Centered Air Openings (G) (2 Openings minimum) 3. Outer Wall of Enclosure Figure 3 © Copyright, Alliance Laundry Systems LLC - Part No. D514685R5 DO NOT COPY or TRANSMIT...
  • Page 10: Connect Dryer Exhaust System

    MUST be exhausted to the out- WARNING doors. To reduce the risk of fire, DO NOT use plastic or thin W604 foil ducting to exhaust the dryer. W354 © Copyright, Alliance Laundry Systems LLC - Part No. D514685R5 DO NOT COPY or TRANSMIT...
  • Page 11: Exhaust Direction

    DO NOT use sheet optional equipment at extra cost. metal screws or fasteners on exhaust pipe joints which extend into the duct and catch lint. © Copyright, Alliance Laundry Systems LLC - Part No. D514685R5 DO NOT COPY or TRANSMIT...
  • Page 12: Exhaust System

    For maximum drying performance, we recom- ized Dealers, Distributors, or local service person- mend you allow more clearance than the clearances that are nel. listed throughout this manual. © Copyright, Alliance Laundry Systems LLC - Part No. D514685R5 DO NOT COPY or TRANSMIT...
  • Page 13 For proper operation at altitudes above 760 m [2500 feet] the gas valve spud orifice size must be reduced to ensure complete com- bustion. Refer to Table 3 and Table 4 . © Copyright, Alliance Laundry Systems LLC - Part No. D514685R5 DO NOT COPY or TRANSMIT...
  • Page 14: Reverse Door, If Desired

    Figure 9 5. Remove door strike from door liner and reinstall on opposite side. DRY2052N_SVG Figure 6 DRY1917N_SVG Figure 10 2. Remove all nine screws. © Copyright, Alliance Laundry Systems LLC - Part No. D514685R5 DO NOT COPY or TRANSMIT...
  • Page 15: Wipe Out Inside Of Dryer

    MUST con- form with the latest edition of the Australian Electri- cal Standards, AS3000, SAA wiring rules, and such local regulations that might apply. W478 © Copyright, Alliance Laundry Systems LLC - Part No. D514685R5 DO NOT COPY or TRANSMIT...
  • Page 16 1. Lead-In Cord 2. Earth/Ground Screw 3. Lead-In Cord Plug 4. Earth/Ground Figure 16 Gas Dryer NOTE: The wiring diagram is located in the control cab- inet. © Copyright, Alliance Laundry Systems LLC - Part No. D514685R5 DO NOT COPY or TRANSMIT...
  • Page 17: Earth/Ground Instructions

    © Copyright, Alliance Laundry Systems LLC - Part No. D514685R5 DO NOT COPY or TRANSMIT...
  • Page 18: All Dryers

    Troubleshooting section of the Dryer User’s Guide for corrective action. WARNING Any disassembly requiring the use of tools must be performed by a suitably qualified service person. W299 © Copyright, Alliance Laundry Systems LLC - Part No. D514685R5 DO NOT COPY or TRANSMIT...
  • Page 19: Installer Checklist

    Start and Run Dryer in Heat Setting to Verify Dryer is sired. Heating. NOTE: Refer to Installation manual for correc- tive action, if necessary. CHECK CHECK DRY2052N_SVG1 Refer to the manual for more detailed information © Copyright, Alliance Laundry Systems LLC - Part No. D514685R5 DO NOT COPY or TRANSMIT...

This manual is also suitable for:

Adge8b black

Table of Contents