Alliance Laundry Systems ADE3SRGS173CW01 Troubleshooting Manual
  1. Manuals
  2. Brands
  3. Alliance Laundry Systems Manuals
  4. Dryer
  5. ADE3SRGS173CW01
  6. Troubleshooting manual
Alliance Laundry Systems ADE3SRGS173CW01 Troubleshooting Manual

Alliance Laundry Systems ADE3SRGS173CW01 Troubleshooting Manual

Home dryers
Hide thumbs
Table of Contents

Advertisement

Quick Links

Home Dryers
Refer to Page 6 for Model Numbers
Original Instructions
DRY726C_SVG
Keep These Instructions for Future Reference.
CAUTION: Read the instructions before using the machine.
(If this machine changes ownership, this manual must accompany machine.)
Part No. D515517ENR3
www.alliancelaundry.com
June 2018

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADE3SRGS173CW01 and is the answer not in the manual?

Questions and answers

Related Manuals for Alliance Laundry Systems ADE3SRGS173CW01

Summary of Contents for Alliance Laundry Systems ADE3SRGS173CW01

  • Page 1 Home Dryers Refer to Page 6 for Model Numbers Original Instructions DRY726C_SVG Keep These Instructions for Future Reference. CAUTION: Read the instructions before using the machine. (If this machine changes ownership, this manual must accompany machine.) Part No. D515517ENR3 www.alliancelaundry.com June 2018...

  • Page 3: Table Of Contents

    Burner Flame (Gas Models)................39 © Copyright 2018, Alliance Laundry Systems LLC All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher.
  • Page 4 Igniter Check (Gas Models)................49 Thermal Fuse Electric (Models)..............49 Heater Assembly (Electric Models)..............49 Cycling or Limit Thermostat................50 Door Switch....................50 Internal Wiring of Dryer Motor Switch..........51 © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 5: Safety Information

    The manufacturer will not be responsible for any injury or property damage arising from im- proper service and/or service procedures. W008 © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 6: Locating An Authorized Service Person

    Locating an Authorized Service Person Alliance Laundry Systems is not responsible for personal injury or property damage resulting from improper service. Review all service information before beginning repairs. Warranty service must be performed by an authorized technician, using authorized factory parts.

  • Page 7: Introduction

    ADEE9RGS175TW01 ADGE9BGS545DW01 ZDEE8RGS173CW01 ADE4BRGS175TW01 ADEE9RGS433XW34 ADGE9BSS113CN01 ZDEE8RGS543FW01 ADEE8BWS435AW01 ADEE9RGS435XW34 ADGE9BSS113FN01 ZDEE8RGS545FW01 ADEE8RGS173CW01 ADEE9RGS453NW29 ADGE9BSS113TN01 ZDEE8RWS545RW01 ADEE8RGS173TW01 ADEE9RGS453NW36 ADGE9BSS115CN01 ZDEE9BGS173CW01 ADEE8RWS455SW01 ADEE9RGS455LW26 ADGE9BSS115CN14 ZDEE9BGS543FW01 Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...
  • Page 8 ADG4BRGS115CW14 ADGE9RGS303XW01 ZDGE9BGS115FW01 ADEE9BSS173TN01 ADG4BRGS115TW01 ADGE9RGS303XW26 ZDGE9BSS113CN01 ADEE9BSS175CN01 ADGE8BWS305AW01 ADGE9RGS305XW01 ZDGE9BSS113FN01 ADEE9BSS175CN14 ADGE8RGS113CW01 ADGE9RGS543DW01 ZDGE9RGS113CW01 ADEE9BSS175TN01 ADGE8RGS113TW01 ADLE9BGS303XW34 ZDGE9RGS113FW01 ADEE9BSS433LN01 ADGE9BGS113CW01 ADLE9BGS305XW34 ZDGE9RGS115FW01 Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 9: How Your Dryer Works

    If dryer heats but timer does not advance, refer to No Timer Advance in Automatic Cycles. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 10: Troubleshooting

    Continue to monitor these points un- wire connections at the heating element and timer (blue/black til the burner has shut off (this will take several minutes even © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...
  • Page 11 (located on the blower assembly). If the wire shows continuity, reattach the wire on terminal “T” of timer. Replace cycling thermostat and check for proper operation. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 12: Troubleshooting Flowcharts

    Refer to the washer's serial plate to determine proper voltage it is designed to operate on. Refer to Figure 1 for serial plate location. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 13: Dryer Motor Does Not Run

    Continued on next page © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...
  • Page 14 Is wiring broken, Refer to wiring loose or incorrect? diagram. Refer to wiring Is power cord diagram for correct miswired? wiring. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 15: Dryer Stops In Cycle; Quits After The First Few Loads; Has A Burningsmell; Cycles On Motor Thermal Protector

    Is there broken, Refer to wiring loose or incorrect diagram. wiring? Refer to Adjustments Are motor switch section to check functions inoperative? switch and windings. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 16: Dryer Motor Runs But Cylinder Does Not Turn

    Is idler lever spring Replace or reconnect Remove some laundry broken, weak or Is dryer overloaded? spring. from dryer. disconnected? Continued on next page © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...
  • Page 17 Is the wrong belt correct part number installed? in parts manual and replace belt if needed. Is idler arm bent? Replace idler arm. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 18: Dryer Motor Does Not Stop

    Test switch and Is door switch replace if inoperative? inoperative. Test timer/electronic Is timer/electronic control and replace control inoperative? if inoperative. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 19: Dry Runs Only When Door Is Open

    Troubleshooting Flowcharts Dry Runs Only When Door is Open Rewire door switch. Is door switch Refer to wiring miswired? diagram. Replace door switch. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 20: Dryer Heating Assembly Does Not Heat Or Burner Does Not Ignite

    Try another supply insufficient? cool-down period, or gas shut-off valve or cycle. a no heat cycle)? correct low gas pressure. Continued on next page © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...
  • Page 21 Reconnect as required. Gas Models: Is gas flow in gas orifice Clean out gas orifice. restricted? © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 22: Igniter Does Not Glow (Gas Supply Sufficient) - Gas Dryer Models

    (pink and blue wires)? wiring. Has flame sensor failed with contacts Replace sensor. open? Is igniter broken or Replace igniter. open? © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 23: Burner Ignites And Goes Out Repeatedly (Gas Dryer Models)

    Check gas supply and Is gas supply pressure. Make sure insufficient? gas shut-off valve is turned on. Replace igniter and Is igniter cracked? bracket. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 24: Igniter Glows But Burner Does Not Ignite (Gas Dryer Models)

    Loosen screw and Is sensor improperly properly position the installed on burner sensor on the burner housing? housing. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 25: Dryer Heater Assembly Or Burner Shuts Off Prematurely

    Gas Models: Is burner Adjust flame. Refer Is wiring broken, Refer to wiring flame improperly to Adjustments loose or incorrect? diagram. adjusted? section. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...
  • Page 26 Troubleshooting Flowcharts © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 27: Dryer Heater Assembly Or Burner Repeatedly Cycles Off On Limit Thermostat

    Disassemble and clean Is there an air leak Check and replace external exhaust exhaust system. at blower seal? seal if necessary. system? Continued on next page © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...
  • Page 28 Is there an air leak Check and replace at cylinder seal(s)? seal(s) if necessary. Is there an air leak Check and replace at front panel seal? seal if necessary. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 29: Dryer Heater Assembly Or Burner Does Not Shut Off

    Motor does not stop? Does Not Stop paragraph. Refer to wiring Is wiring incorrect? diagram. Remove heater Has heater assembly assembly and check shorted? for short. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 30: Clothes Do Not Dry In Dryer

    4 inch water column, ask Gas Company to correct. Continued on next page © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...
  • Page 31 Troubleshooting Flowcharts Continued from previous page Is belt installed Check for proper improperly (low RPM)? installation. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 32: Timer/Electronic Control Does Not Advance In Automatic Cycle

    Continued on next page © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...
  • Page 33 Troubleshooting Flowcharts Continued from previous page Check and fix any gap Are there air leaks? between air duct and filter mounting. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 34: Clothes Are Too Hot When Removed From Dryer

    Loading door and front panel, Are seals inoperative? front panel and front bulkhead, blower cover and air duct, and cylinder and front or rear bulkhead. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 35: Excessive Chattering Or Vibrating Noise In Dryer

    Are idler pulley and Replace idler pulley shaft worn? and shaft. Are rollers worn? Replace rollers. Check blower fan for missing or cracked fan blades. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 36: Excessive Humming Or Whistling Noise In Dryer

    Replace the current housing and cover. Check blower fan for missing or cracked fan blades. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 37: Error Codes - Electronic Control Models

    Table continues... Output board not Terminate cycle. Er nr ready error: Hard- Replace output ware failure. board. Power down machine to clear. Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...
  • Page 38 Power down ma- chine to clear. Board shorted er- Replace output Er bS ror: Hardware error. board. Power down machine to clear. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 39: Adjustments

    W262 NOTE: After the dryer has operated for approximately three minutes, exhaust air or exhaust pipe should be warm. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...
  • Page 40 Gas Shut-Off Valve Only Applicable on Certain Mod- 1. Shut-off Valve Handle 2. Air Shutter Lockscrew 3. Air Shutter 4. 1/8" Pipe Plug (For checking manifold pressure) Figure 4 © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 41: Test Procedures

    “Infinite” (open) reading should be found between L2 and e. Rotate timer to “OFF” position. “Infinite” (open) reading should be found between L1 and M and between L2 and © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 42: Drive Motor

    7. Motor Disconnect Block 8. Motor Switch Perm. Press – 9. Motor and Exhaust Assembly Regular – 10. Drive Motor X indicates closed Figure 7 © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 43: Drive Motor - Motor Switch

    NOTE: Disconnect terminal 5 wire (yellow or copper) from motor switch before testing start terminals. NOTE: Reconnect terminal 5 wire (yellow or copper) to motor switch before testing run terminals. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...
  • Page 44 Run Terminals: Manually depress actuator. Continuity Inoperative start exists between switch switch. Replace terminal 6 and switch. terminal 5 (yellow or copper wire). © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 45: Drive Motor - Motor Windings

    Motor with Switch on Blower End. Using a small bladed screwdriver, press the thermal overload protector mount- ing tab downward and remove the thermal overload pro- © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...
  • Page 46 5. Install new motor switch onto motor and reconnect motor switch leads removed in Step “2”. Refer to Figure 8 . 1. Thermal Overload Protector 2. Mounting Tab 3. Motor Switch Figure 8 © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 47: Burner System Operation - Gas Models

    The sensor triggers the current to travel around the secondary coil and through the igniter, causing the igniter to get hot. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 48: Electrical Circuit Ignition System (Gas Models)

    Holding Coil – Terminals 1 & 1365 ± 230 Ohms Booster Coil – Terminals 1 & 560 ± 100 Ohms Table 1 Coil Tolerance Readings continues... © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 49: Sensor Check (Gas Models)

    4. Set meter to read Ohms. Apply meter probes to the heater as- sembly terminals. Meter should read as follows: (Cold Ohms). Element Col- Voltage/Hz. Resistance or Code Reading Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 50: Cycling Or Limit Thermostat

    6. Apply probes to terminals 1 and 2 with door closed. The me- ter should read “infinite”. 7. Open door. Meter should read “infinite” between 1 and 3 and “zero” between 1 and 2. © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

  • Page 51: Internal Wiring Of Dryer Motor Switch

    Whenever ground wires are removed during serv- icing, these ground wires must be reconnected to ensure that the dryer is properly grounded. W001R1 1. Motor Switch Attaching Screws Figure 14 © Copyright, Alliance Laundry Systems LLC - Part No. D515517ENR3 DO NOT COPY or TRANSMIT...

This manual is also suitable for:

Adee9bss543dn01Adge9bgs115cw01Adle9rgs303xw34Ade3srgs173tw01Adee9bss543fn01Adge9bgs115cw14 ... Show all

Table of Contents

Save PDF